國立清華大學材料工程學系

Members

:::

Name	Nyan-Hwa Tai
Current Phone No.	#42568 (Lab:33829)
FAX No.	03-5737406
Current Address	Materials Science Laboratory R203, National Tsing Hua University
E-mail
E-mail(2)
Personal Website	http://www.mse.nthu.edu.tw/~nhtai/

Classification	Full-Time
Title	Professor
Discipline	- Material Mechanics -Statics -Introduction to Composite Materials - Composite Materials - Fabrication and Characterization of Composite Materials -Carbon Material and Its Applications
Speciality	-Synthesis of carbon nanotubes and its applications in field emission light -soft panel light -nanocomposites -solar cell -ultra nanocrystalline diamond (UNCD) -and CNT biocompatibility

Publication List

1. Journal Articles
   1. Ying-Chieh Chen, Xiao-Yan Zhong, Bernd Kabius, Jon M.Hiller, Nyan-Hwa Tai, Orlando H. Auciello, I.-Nan Lin, "Improvement of Field Emission Performance on Nitrogen Ions Implanted Ultrananocrystalline Diamond Films through Visualization of Structure Modifications" , Diamond & Related Materials, 20, pp. 238-241 (2011). IF=1.825, 2011-11
   2. Chien-Liang Hwang; Nyan-Hwa Tai, "Vapor phase oxidation of dimethyl sulfide with ozone over ion-exchanged zeolites" , Applied Catalysis A: General, 393, pp.251-256, (2011). IF=3.384, 2011
   3. K.J. Sankaran, N.H. Tai*, I.N. Lin, "Investigation in the role of hydrogen on the properties of diamond films grown using CH4/Ar/H2 microwave plasma" , Diamond & Related Materials, 20, pp.232-237 (2011). IF=1.825, 2011
   4. Y.C. Lin, K.J. Sankaran, Y.C. Chen, C.Y. Lee, H.C. Chen, I.N. Lin, N.H. Tai*, "Enhancing electron field emission properties of UNCD films through nitrogen incorporation at high substrate temperature" , Diamond & Related Materials, 20, pp.191-195 (2011). IF=1.825, 2011
   5. D D Nguyen, N H Tai*, Y L Chueh, S Y Chen, Y J Chen, W S Kuo, T W Chou, C S Hsu and L J Chen, "Synthesis of ethanol soluble few-layer graphene nanosheets for flexible and transparent conducting composite films" , Nanotechnology, Vol. 22, 295606 (2011). IF=3.652, 2011
   6. Yin-Ju Chen, Nguyen Duc Dung, Yu-An Li, Ming-Chuen Yip, Wen-Kuang Hsu, Nyan-Hwa Tai*, "Investigations on the Electric Conductivity and the Electromagnetic Interference Shielding Efficiency of the SWCNTs/GNS/PAni Nanocomposites" , Diamond and Related Materials, 20, pp.1183–1187 (2011). IF=1.825, 2011
   7. Yu-An Li, Nyan-Hwa Tai*, Swe-Kai Chen, Tsung-Yen Tsai,, "Enhancing the electrical conductivity of carbon-nanotube-based transparent conductive films using functionalized few-walled carbon nanotubes decorated with palladium nanoparticles as fillers" , ACS nano, Vol.5, No.8, pp.6500-6506 (2011). IF=9.865, 2011
   8. Duc Dung Nguyen, Nyan-Hwa Tai*, Szu-Ying Chen, and Yu-Lun Chueh, "Controlled growth of carbon nanotube-graphene hybrid materials for flexible & transparent conductors and electron field emitters" , Nanoscale. IF=4.109, 2011
   9. Joseph P. T., Nyan-Hwa Tai, Yu-Fen Tzeng, C. Y. Lee, Hsiu-Fung Cheng, and I-Nan Lin, "Growth and electron field emission properties of ultrananocrystalline diamond on silicon nanostructures" , Diamond & Related Materials, 18, 2-3, 169-172 (2009), 2009
   10. Tsung-Yen Tsai; Nyan-Hwa Tai; Kuang-Chung Chan; Shu-Hsing Lee; Lih-Hsiung Chan;, "Growth of vertically aligned carbon nanotubes on glass substrate at 450℃ through the thermal chemical vapor deposition method" , Diamond & Related Materials, 18, 307–311, (2009), 2009
   11. X. Y. Zhong, Y. C. Chen, N. H. Tai, I. N. Lin, J. M. Hiller and O. Auciello, "Effect of pretreatment bias on the nucleation and growth mechanisms of ultrananocrystalline diamond films via bias-enhanced nucleation and growth: An approach to interfacial chemistry analysis via chemical bonding mapping" , Journal of Applied Physics, 105, 034311, (2009), 2009
   12. Keng-Fu Liu, Li-Ju Chen, Nyan-Hua Tai, and I-Nan Lin, "Effect of Mo-buffer layer on the growth behavior and the electron field emission properties of UNCD films" , Diamond & Related Materials, 18 (2009) 181–185. (2009), 2009
   13. Meng-Kao Yeh, Nyan-Hwa Tai, and Bo-Yi Chen, "Effects of anisotropic material property on the spring constant and the resonant frequency of atomic force microscope cantilever" , Review of Scientific Instruments, 80, 043705 (2009), 2009
   14. P T Joseph P. T., N H Tai, C H Chen, H Niu, H F Cheng, and I N Lin, "On the mechanism of enhancement on electron field emission properties for ultrananocrystalline diamond films due to ion implantation" , Journal of Physics D: Appl. Phys. 42, 105403 (2009), 2009
   15. Ying-Chieh Chen, Don-Ching Lee, Chao-Yang Hsiao, Yu-Fen Chung, Huang-Chin Chen ,, "The effect of ultra-nanocrystalline diamond films on the proliferation and differentiation of neural stem cells" , Biomaterials 30, 3428–3435, 2009
   16. P. T. Joseph, N. H. Tai*, C. H. Chen, H. Niu, H. F. Cheng, U. A. Palnitkar, and I. N. Lin, "Field emission enhancement on ultrananocrystalline diamond films by in situ heating during single or multi-energy ion implantation processes" , Journal of Applied Physics, 105, 123710, (2009), 2009
   17. T. Y. Tsai, C. Y. Lee, N. H. Tai, and W. H. Tuan, "Transfer of patterned vertically aligned carbon nanotubes onto plastic substrates for flexible electronics and field emission devices" , Applied Physics Letters, 95, 013107 (2009) (文章之圖被取用為當期封面，並被刊載予Virtual Journal of Nanoscale Science & Technology), 2009
   18. Tsung-Yen Tsai, Tsung-Han Chen, Nyan-Hwa Tai*, Shih-Chin Chang, Hui-Chen Hsu, and Thomas Joseph Palathinkal, "Fabrication of a Carbon Nanotube Array Using a Catalyst- Poisoning Layer in the Inverse Nano Sphere Lithography Method" , Nanotechnology 20,305303 (2009) (文章被選錄刊載於Nanoweb), 2009
   19. Shih-Hao Tseng and Nyan-hwa Tai, "Exploiting the effect of twisting on the electrical resistance of a single-walled carbon nanotube rope to trigger ignition using a 9-V battery" , Carbon 47, 15. p.3472 (2009), 2009
   20. Chia-Yun Chen, Ieng-Wai Un, Nyan-Hwa Tai, and Ta-Jen Yen, "Asymmetric coupling between subradiant and superradiant plasmonic resonances and its enhanced sensing performance" , Optics Express, Vol. 17, No.17, 15372 (2009), 2009
   21. S.H. Tseng and N.H. Tai, "Fabrication of a transparent and flexible thin film transistor based on single-walled carbon nanotubes by the direct transfer method" , Applied Physics Letters, Vol. 90(20), 204104, 2009. Virtual Journal of Nanoscale Science & Technology (Issue of November 30, 2009), 2009
   22. Palathinkal TJ, Tai NH, Lee CY, Niu H, Cheng HF, Pong WF, Lin IN, "Field Emission Enhancement in Ion Implanted Ultra-nanocrystalline Diamond Films" , PLASMA PROCESSES AND POLYMERS, 6, S834-S839, (2009), 2009
   23. Meng-Kao Yeh , Nyan-Hwa Tai , and Yan-Jyun Lin, "Mechanical Properties of Phenolic- based Nanocomposites Reinforced by Multi-walled Carbon Nanotubes and Carbon Fibers" , Composites: Part A 39 pp.677–684 IF=1.662, 2008
   24. Meng-Kao Yeh, Nyan-Hwa Tai, Guo-Chian Ling and Chi-Yuan Huang, "Electromagnetic Shielding of Multi-walled Carbon Nanotube/Epoxy Nanocomposites" , AMR, EI Journal, Accepted. (2008), 2008
   25. K. R. Wang, S. J. Lin1, L. W. Tu, M. Chen, Q. Y. Chen, T. H. Chen, M. L. Chen, H. W. Seo, N. H. Tai, S. C. Chang, I. Lo, D. P. Wang, W. K. Chu, "InN nanotips as excellent field emitters" , Applied Physics Letters, Mar. 17, 2008 IF=3.596, 2008
   26. Y. C. Chen, X. Y. Zhong, A. Konicek, D. S. Grierson, N. H. Tai, I. N. Lin, B. Kabius,, "Synthesis and Characterization of Smooth Ultra-nanocrystalline Diamond Films via Low Pressure Bias-Enhanced Nucleation and Growth" , APPLIED PHYSICS LETTERS 92, 133113, 2008 IF=3.596, 2008
   27. Chen LJ, Liu CC, Tai NH, Lee CY, Fang WL, Lin IN, "Effects of tungsten metal coatings on enhancing the characteristics of ultrananocrystalline diamond films" , JOURNAL OF PHYSICAL CHEMISTRY C pp. 3759-3765, Vol.112, No.10, Mar. 12, 2008, 2008
   28. P. T. Joseph, N. H. Tai, Chi-Young Lee, H. Niu, W. F. Pong, and I. N. Lin, "Field emission enhancement in nitrogen-ion-implanted ultrananocrystalline diamond films" , J. Applied Physics, Vol. 103, No. 4, (2008) IF=2.171 (本論文被Virtual Journal收錄為傑出奈米論文), 2008
   29. Meng-Kao Yeh, Tsung-Han Hsieh, Nyan-Hwa Tai, "Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites" , Materials Science and Engineering A, 483–484, pp.289-292 (2008) IF=1.457, 2008
   30. Yan-Lun Liou a, Jyun-Cheng Liou a, Jin-Hua Huang a, Nyan Hwa Tai a, I-Nan Lin, "Fabrication and field emission properties of ultra-nanocrystalline diamond lateral emitters" , Diamond & Related Materials 17 (2008) 776–781 IF=1.788, 2008
   31. P. T. Joseph, Nyan-Hwa Tai, Yi-Chun Chen, Hsiu-Fung Cheng, I-Nan Lin, "Transparent ultrananocrystalline diamond films on quartz substrate" , Diamond and Related Materials, 17 (2008) 476–480. IF=1.788, 2008
   32. U.A.Palnitkar, P. T. Joseph, N. H. Tai, and I. N. Lin, "Adhesion Properties of Nitrogen Ion Implanted Ultrananocrystalline Diamond films on Silicon substrate" , Diamond and Related Materials, 17 (2008) 864–867. IF=1.788, 2008
   33. Meng-Kao Yeh, Nyan-Hwa Tai, and Bo-Yi Chen, "Influence of Poisson’s Ratio Variation on Lateral Spring Constant of Atomic Force Microscopy Cantilevers" , Ultramicroscopy 108, 1025-1029 (2008) IF=1.996, 2008
   34. Yu-Fen Tzeng, Chi-Young Lee, Hsin-Tien Chiu, Nyan-Hwa Tai, I-Nan Lin, "Electron field emission properties on ultra-nano-crystalline diamond coated silicon nanowires" , Diamond & Related Materials 17 (2008) 1817–1820 IF=1.788, 2008
   35. P.T. Joseph, L. J. Chen, N. H. Tai, U.A. Palnitkar, H. F. Cheng, and I.N. Lin, "Novel methods of growing UNCD coated NCD tips and their field emission property study" , J. nanoscience and Nanotechnology, Vol.8, (2008), 4198–4201. IF=1.987, 2008
   36. T. Y. Tsai, Y. A. Li, H.C.Su, N. H. Tai*, K. C. Chen, S. H. Lee, L. H. Chan, Y. Y. Chang, "Low Temperature Growth of Carbon Nanotubes using Ni nanopowder Mixed with Ag-paste as Catalyst" , Diam. Relat. Mater. 17, 594-597 (2008) IF=1.788, 2008
   37. P. T. Joseph, N. H. Tai, H. Niu, U. A. Palnitkar, H. F. Cheng, and I. N. Lin, "Structural modification and enhanced field emission on ultrananocrystalline diamond films by nitrogen ion implantation" , Diam. Relat. Mater. 17, 1812-1816 (2008) IF=1.788, 2008
   38. Wen-Tai Hong and Nyan-Hwa Tai, "Investigations on the Thermal Conductivity of Composites Reinforced with Carbon Nanotubes" , Diam. Relat. Mater. 17, 1577-1581 (2008) IF=1.788, 2008
   39. Ying-Chieh Chen, Nyan-Hwa Tai, I-Nan Lin, "Substrate temperature effects on the electron field emission properties of nitrogen doped ultra-nanocrystalline diamond" , Diam. Relat. Mater. 17, 457-461 (2008) IF=1.788, 2008
   40. Joseph P. T., Nyan-Hwa Tai, Yu-Fen Tzeng, C. Y. Lee, Hsiu-Fung Cheng, and I-Nan Lin, "Growth and electron field emission properties of ultrananocrystalline diamond on silicon nanostructures" , Diamond & Related Materials,Accepted. (2008), 2008
   41. Nyan-Hwa Tai, Meng-Kao Yeh, and Tai-Hao Peng, "Experimental Study and Theoretical Analysis on the Mechanical Properties of SWNTs/Phenolic Composites" , Compos. Part B-Eng. 39, 926-932 (2008) IF=1.311, 2008
   42. T. H. Chen, T. Y. Tsai, K. C. Hsieh, S. C. Chang!, N. H. Tai, and H. L. Chen, "Two-dimensional metallic nanobowl array transferred onto thermoplastic substrates by microwave heating of carbon nanotubes" , Nanotechnology 19, 465303 (2008) IF=3.310, 2008
   43. Meng-Kao Yeh, Nyan-Hwa Tai, and Yan-Jyun Lin, "Glass Transition Temperature of Phenolic-based Nanocomposites Reinforced by MWNTs and Carbon Fibers" , Key Engineering Materials, Vols. 334-335 (2007), pp. 713-716, 2007
   44. N.H. Tai, M.K. Yeh, C.H. Yang, S.H. Tseng, C.C. Chiu, T.-Y. Tsai, J.H., "Synthesis of Carbon Nanotubes and Its Applications in Composites and Field Emission" , Materials Science Forum, Vol. 539-543, (2007) pp. 3491-3496, 2007
   45. Bo-Yi Chen, Meng-Kao Yeh, and Nyan-Hwa Tai, "The Accuracy of the Spring Constant of Atomic Force Microscopy Cantilevers by Finite Element Method" , Analytical Chemistry, 79, pp.1333-1338 (2007) IF=5.287, 2007
   46. Li-Ju Chen, Nyan-Hwa Tai, Chi-Young Lee, I.-Nan Lin, "Effects of pretreatment processes on improving the formation of ultra-nano-crystalline diamond (UNCD)" , Journal of Applied Physics, 101, 064308 IF=2.171, 2007
   47. Shih H. Tseng, Nyan H. Tai, Wen K. Hsu, Lih J. Chen, Jhy H. Wang, ChienC. Chiu, Cyi Y. Lee, Lih J Chou, Keh C. Leou, "Ignition of Carbon Nanotubes using a Photoflash" , Carbon, 45, pp. 958-964 IF=4.260, 2007
   48. Kuang-Chung Chen, Chia-Fu Chen, Jen-Hao Lee, Tai-Lin Wu, Chian-Liang Hwang, Nyan-Hwa Tai, Ming-Chun Hsiao, "Low-temperature CVD growth of carbon nanotubes for field emission application" , Diamond and Related Materials 16 (3): 566-569 MAR 2007 IF=1.788, 2007
   49. Hsin-Fu Kuo, Der-Hsien Lien, Wen-Kuang Hsu, Nyan-Hwa Tai, Shih-Chin Chang, "Gas sensing improvement of carbon nanotubes by NH4OH-flash treatment: a nondestructive purification technique" , JOURNAL OF MATERIALS CHEMISTRY 17 (34): 3581-3584 , and also selected as hot article by British Royal Society of Chemistry IF=1.788, and also selected as hot article by British Royal Society of Chemistry, 2007
   50. Wang, CH; Lin, HK; Ke, TY; Palathinkal, TJ; Tai, NH; Lin, IN; Lee, CY; Chiu, HT, "Growth of polycrystalline tubular silicon carbide Yajima-type reaction at the vapor-solid interface" , CHEMISTRY OF MATERIALS, 19 (16): 3956-3962 IF=4.883, 2007
   51. M. K. Yeh, N. H. Tai, Y. J. Lin*, "Fabrication and mechanical properties of MWNTs/ phenolic nanocomposites" , Materials Science Forum, Vol. 505-507, pp. 121-126, 2006 (SCI Journal) (NSC93-2212-E-007-047) IF=0.399, 2006
   52. Chi-Young Lee, Nyan-Hwa Tai, Shu-Hsu Hsieh*, "Synthesis of Nano-Sized Polycrystalline PZT Powders using Molecular Building Blocks by Designed Chemical Route" , Journal of Nanoparticle Research, 8 (2), pp. 287-292 (SCI Journal) IF=2.156, 2006
   53. Chien-Chao Chiu*, Chia-Yun Chen*, Nyan-Hwa Tai and Chuen-Horng Tsai, "Growth of High-quality Single-walled Carbon Nanotubes Through the Thermal Chemical Vapor Deposition using Co-sputtering Fe -Mo Films as Catalysts" , SURFACE & COATINGS TECHNOLOGY 200 (10): 3199-3202 (SCI Journal)(NSC 93-2216-007-024) (2006) IF=1.559, 2006
   54. Cheng-Hsien Chou*, Yung-Chen Lin*, Jin-Hua Huang, Nyan-Hwa Tai, I-Nan Lin, "Growth of high quality Al thin film on diamond using TiN/Ti buffer layer" , Diamond and Related Materials, 15 (2-3): 404-409 (SCI Journal) (2006) IF=1.935, 2006
   55. Yeh, M. K. Tai, N. H. and Liu, J. H*, "Dynamic Mechanical Properties of MWNTs/Phenolic Nanocomposites" , Key Engineering Materials Journal. Vol. 306-308, pp. 1073-1078, 2006 (SCI Journal) (NSC93-2212-E-007-047) IF=0.224, 2006
   56. Meng-Kao Yeh, Nyan-Hwa Tai, Jia-Hau Liu*, "Mechanical Behavior of Phenolic-based Composites Reinforced with Multi-walled Carbon Nanotubes" , Carbon 44 (2006) 1–9, Available, Online. (SCI Journal) (NSC93-2212-E-007-047) IF=3.884, 2006
   57. Ying-Chieh Chen*, Chia-Yun Chen*, Nyan-Hwa Tai, Yen-Chih Lee*, Su-Jien Lin*, I-Nan Lin, "Characteristics of ultra-nano-crystalline diamond films grown on the porous anodic alumina template" , Diamond and Related Materials, 15 (2-3): 324-328 (2006) (SCI Journal) (NSC 93-2112-M-032-010) IF=1.935, 2006
   58. Der-Hsien Lien*, Wen-Kuang Hsu, Hsiao-Wen Zan, Nyan-Hwa Tai, Chuen-Horng Tsai, "Photo-current amplifier at carbon nanotube-metal contacts" , Advanced Materials, 2006,18, 98-103, (SCI Journal) (NSC 93-2113-M-007-028) IF=7.896, 2006
   59. Chi-Young Lee, Nyan-Hwa Tai, Shu-Hsu Hsieh*, "The formation of perovskite PbTiO3 powders by sol–gel process" , Materials Chemistry and Physics (2006), 97 (2-3): 468-471 IF=1.657, 2006
   60. Chien-Chao Chiu*, Nyan-Hwa Tai, Meng-Kao Yeh, Bo-Yi Chen*, Shih-Hao Tseng* and Ying-Huang Chang, "Tip-to-tip growth of aligned single-walled carbon nanotubes under an electric field" , J. of Crystal Growth. (SCI Journal) (NSC 92-2120-E-007-004) 290 (1): 171-175 (2006) IF=1.809, 2006
   61. Chien-Chao Chiu*, Tsung-Yen Tsai*, Nyan-Hwa Tai, Chi-Young Lee, "Synthesis of ultra long vertically aligned carbon nanotubes using the rapid heating and cooling system in the thermal chemical vapor deposition process" , SURFACE & COATINGS TECHNOLOGY 200 (10): 3215-3219 (2006) IF=1.559, 2006
   62. Nyan-Hwa Tai, Meng-Kao Yeh, Jia-Hau Liu*, and C. H. Yong*, "Fabrication and characterization of nanocomposites reinforced by carbon nanotubes (2) - Testing of mechanical properties" , KEY ENGINEERING MATERIALS 313: 1-6 2006 IF=0.224, 2006
   63. C. H. Chou*, Y. C. Lin*, H. H. Huang, N. H. Tai, I. N. Lin, "Preparation of highly textured AlN films using Mo and Ti electrode for integrated AlN-based film bulk acoustic wave resonators" , INTEGRATED FERROELECTRICS 80: 407-413 2006 IF=0.410, 2006
   64. C.C. Chiu*, T. Y. Tsai*, and N. H. Tai,, "Field emission properties of carbon nanotube arrays through the pattern transfer process" , NANOTECHNOLOGY 17 (12): 2840-2844 (2006) IF=3.037, 2006
   65. Meng-Kao Yeh, Bo-Yi Chen*, Nyan-Hwa Tai, and Chien-Chao Chiu*, "Force Measurement by AFM Cantilever with Different Coating Layers" , Key Engineering Materials Vols. 326-328, (2006) pp. 377-380, 2006
   66. Meng-Yen Tsai*, Chung-Yi Yu*, Chien-Hsin Yang*, Nyan-Hwa Tai, and Tsong-Pyng Perng,, "Electrical transport properties of individual disordered multiwalled carbon nanotubes" , APPLIED PHYSICS LETTERS 89, (2006), p.192115 IF=3.977, 2006
   67. Debabrata Pradhan*, Li-Ju Chen*, Yen-Chih Lee*, Chi-Young Lee, Nyan-Hwa Tai, I-Nan Lin, "Effect of titanium metal in the prenucleation of ultrananocrystalline diamond film growth at low substrate temperature" , Diamond & Related Materials 15 (2006), pp.1779–1783 IF=1.935, 2006
   68. C.-L. Wang*, Y.C. Liao*, F. C. Hsu*, N.H. Tai and M.K. Wu, "Preparation and Characterization of Thin Film Li4Ti5O12 Electrodes by Magnetron Sputtering" , Journal of The Electrochemical Society, 152 (4) A:653-657, (2005) (SCI Journal) (NSC 91-2112-M-007-056), 2005
   69. Weileun Fang, Huai-Yuan Chu*, Wen-Kuang Hsu, Tung-Wen Cheng*, Nyan-Hwa Tai, "Polymer reinforced aligned multi-walled carbon nanotube composites for MEMS applications" , Advanced Materials, 2005, 17, 2987–2992 (SCI Journal) (NSC-93-2218-E-007-012, NSC-93-2113-M-007-028)., 2005
   70. Joseph PT*, Chen YC*, Chu YH*, Cheng HF, Tai NH, Lin IN, "Microwave properties of BST and BST/BMT thin films grown on sapphire substrate by evanescent microwave probe" , INTEGRATED FERROELECTRICS 77: 45-50 2005, 2005
   71. Li KY*, Tai NH, Lin IN, "Preparation of PNN-PZT thick film on Pt/Ti/SiO2/Si substrate by laser lift-off process" , INTEGRATED FERROELECTRICS 69: 135-141 2005, 2005
   72. Tsung-Yen Tsai*, Nyan-Hwa Tai, and I-Nan Lin, "Characterizations of Carbon nanotube Electron Field Emission Devices Prepares by LTCC Process" , Diamond and Related Materials 13 (2004) 982-986 (SCI Journal) (NSC-91-2120-E-007-004), 2004
   73. Nyan-Hwa Tai, Che-Fu Chen, C.Y. Lee,, "Pulsed Chemical Vapor Infiltration: Carbon/SiC Nanocomposites”, Chapter in a Book ”Multiphased Ceramic Materials" , Editors: W.H. Tuan and J. K. Guo, Springer-Verlag Berlin Heidelberg (2004). (Chapter in a Book), 2004
   74. Yung-Chen Lin*, Cheng-Hsien Chou*, Nyan-Hwa Tai, Jin-Hua Huang, and I-Nan Lin, "Pb(Zr, Ti)O3 Thin Film Deposited Using ALN Buffer Layer and Its Ferroelectric Properties" , Integrated Ferroelectrics, 64:237-246, (2004) (SCI Journal), 2004
   75. Chou CH*, Huang JH, Lin YC*, Tai NH, Lin IN, "Low temperature synthesis of AlN films by ICP-assisted metalorganic chemical vapor deposition method" , INTEGRATED FERROELECTRICS 68: 95-103 2004, 2004
   76. Nyan-Hwa Tai, M.eng-Kao Yeh, Jia-Hau Liu, "Enhancement of the Mechanical Properties of Carbon Nanotube/phenolic Composites using a Carbon Nanotube Network as the Reinforcement" , Carbon, 42, pp. 2774-2777 (2004) (SCI Journal) (NSC92-2120-E-007-004), 2004
   77. I-Nan Lin, Kun-Che Hsieh*, Kun-Yu Lee*, Nyan-Hwa Tai, "Preparation of Ferroelectric Pb(Zr1-xTix)O3/Si Film by Laser Lift-off Technique" , Journal of European Ceramic Sociaty, 24 (2004) 975-978 (SCI Journal)(NSC 91-2216-E-007-027), 2004
   78. Hsiang-Ming Hsoeh, Nyan-Hwa Tai , Chi-Yuan Lee, J. M. Chen, F. T. Wang, "Electro- chemical Properties of the Multi Wall Carbon Nanotube Electrode for Secondary Lithium-ion Battery" , Review on Adv. Mater. Sci. 4, 50 (2003) (SCI Journal), 2003
   79. H.K. Liu, N.H. Tai and Z.C. Chen, "Effects of SeaWater on the Compressive Strength of Concrete Cylinders Reinfoced by non-adhesive Wound Hybrid Polymer Composites" , Composites Science and Technology, Vol. 62, p.2131 (SCI Journal), 2002
   80. Nyan-Hwa Tai, Yu-Long Lee, Cheng-Hsiung Lin, Hsiu-Fung Cheng, I-Nan Lin, "Ferroelectric Properties of Pb(Zr1-xTix)O3 Graded Thin Films" , Ferroelectries, Vol. 271, p.1825-1830 (2002) (SCI Journal), 2002
   81. N.H. Tai, H.H. Kuo, J.H. Chern Lin, C.P. Ju, "Mechanical and Tribological Properties of 2-D Medium Thick Carbon/Carbon Composites Densified Through Pulsed Chemical Vapor Infiltration" , Journal of Materials Science, Vol. 37, p.3693, (2002) (SCI Journal), 2002
   82. K. C. Hsieh, N. H. Tai , Y. M. Shen, Tong-Hsu and I. N. Lin, "Thick Pb(Ni1/3Nb2/3)O-3-(Pb1-x)(Ti1-yZry)O-3 films prepared by tape-casting" , INTEGR FERROELECTR 46: 3-15 (2002) (SCI Journal), 2002
   83. H.K. Liu, N.H. Tai and Z.C. Chen, "Compressive Strength of Composite/concrete Cylinders after Low Energy Impact" , Journal of Reinforced Plastics and Composites, Vol.20, No. 10, P.849 (2001) (SCI Journal), 2001
   84. Y.H. Guu, H. Hocheng, N. H. Tai, S. Y. Liu, "Effect of electrical discharge machining on the characteristics of carbon fiber reinforced carbon composite" , Journal of Materials Science, Vol. 36, p. 2037 (2001) (SCI Journal), 2001
   85. Nyan-Hwa Tai and Che-Fu Chen, "Nanofiber Formation in the Fabrication of Carbon/Silicon Carbide Ceramic Matrix Nanocomposites by Slurry Impregnation and Pulse Chemical Vapor Infiltration" , Journal of The American Ceramic Society, Vol. 84, [8], p.1683 (2001) (SCI Journal). 本文中之設備示意圖被 國科會工程中心 ”工程科技通訊” 採用為第六十五期封面, 2001
   86. Chien-Kang Kao, Wee-Yih Lin, Hsun Chang, Chuen-Horng Tsai, Nyan-Hwa Tai, Cheng-Chung Chi, and I-Nan Lin, "Optical properties of PECVD TEOS-SiO2 films" , Ferroelectries 264 (1-4): 1949-1954 (SCI Journal), 2001
   87. J.M. Lin, C.C.M Ma, and N.H. Tai, "Carbon Fiber Reinforced Phenolic Resin/Silica Ceramer Composites- Processing, Mechanical and Thermal Properties" , Polymer Composites, 21, (2) 305-311 (2000). (SCI Journal), 2000
   88. N.H. Tai, H.K. Liu and Z.C. Chen, "Compression after Impact (CAI) Strength of Concrete Columns Reinforced by Filament Wound Non-adhesive Composite" , Vol. 21, No.2, Polymer Composites, p.268-280 (2000). (SCI Journal), 2000
   89. H. Hocheng, N.H. Tai and C.S. Liu, "Assessment of Ultrasonic Drilling of C/SiC Composite Materials" , Composite: Part A 31, pp.133-142 (2000). (SCI Journal), 2000
   90. H.K. Liu, N.H. Tai and Z.C. Chen, "Compression Strength of Concrete Columns Reinforced" , Composite-Part A. Vol. 31, No.3, pp. 221-233, (2000) (SCI Journal), 2000
   91. H. K. Liu, N.H. Tai and Z.C. Chen, "Technology and Development of the Concrete Reinforced by Filament Wound Composites" , Bulletin of The Chinese Materials Society, Dec. 1999, (invited, in Chinese)., 1999-12
   92. N. H. Tai, M. C. Yip, and C. T Lin, "Fatigue Properties of the Carbon/PEEK Laminates Subjected Thermal Cycling" , Bulletin of SAMPE-Taiwan Chapter, Nov. 1999, (invited, in Chinese), 1999-11
   93. N.H. Tai, C.C.M. Ma, J. M. Lin and G.Y. Wu, "Effects of Thickness on Impact and Fatigue Behaviors of the Quasi-Isotropic Gr/Epoxy Composites Before and After Low Energy Impacts" , Composite Science and Technology (in press, 1999). (SCI Journal), 1999
   94. J.M. Lin, C.C.M. Ma, N.H. Tai, W. J. Wu and C. Y. Chen, "Preparation and Properties of SiC Modified Carbon/Carbon Composites by Carbothermal Reduction Reaction" , Journal of Materials Science Letters, Vol. 18, pp.1353-1355, (1999). (SCI Journal) (文章之圖被取用為當期封面), 1999
   95. H.K. Liu, N.H. Tai and S.Y. Lin, "Compressive Strength of Hybrid Composite Tubes After Low Energy Impact" , J. of Composites Tech. & Research, Vol. 21, No.2, pp.65-74 (1999). (SCI Journal), 1999
   96. N.H. Tai, M.C. Yip and C.M. Tseng, "Influences of Thermal Cycling and Low-energy Impact on the Fatigue Behavior Gr/PEEK Laminates" , Composites-Part B, Vol. 30, pp. 849-865(1999). (SCI Journal), 1999
   97. N.H. Tai, M.C. Yip and J.L. Lin, "Effects of Low Energy Impact on Fatigue Behavior of the Carbon/Epoxy Composites" , Composites Science and Technology, Vol. 58, pp.1-8 (1998). (SCI Journal), 1998
   98. H. Hocheng, Y. H. Guu and N.H. Tai, "The Feasibility Analysis of Electrical-Discharge Machining of Carbon-Carbon Materials" , International Journal of Materials and Manufacturing Process, Vol. 13, pp.117-132 (1998). (EI Journal), 1998
   99. H. K. Liu, N.H. Tai and W. H. Chen, "Influence of Processing Parameters on Mechanical Properties of Composite Cylinders Fabricated by the Filament Winding Method" , Journal of Chinese Society of Mechanical Engineering, Vol. 19, No. 2, pp.187-197 (1998), 1998
   100. N.H. Tai and H.C. Yu, "Effects of Low-energy Impact and Thermal Cycling Loadings on Fatigue Behavior of the Quasi-isotropic Carbon/Epoxy Composite" , Journal of Polymer Research, Vol. 5, No. 3, pp.143-151 (1998). (SCI Journal), 1998
   101. yan-Hwa Tai, H. K. Liu, Z. C. Chen, "Effects of impact on compressive strength of the Concrete Columns Reinforced by Filament WoundComposites" , Reinforced Plastics/Composites, Vol. 75, June, 1998, pp. 20-40. (Invited, in Chinese), 1998
   102. S.H. Lin, C.C.M. Ma and N.H. Tai, "Mechanical Properties and Morphology of Different Carbon Fiber Lengths in Reinforced Polyetheretherketone (PEEK) Composites" , Journal of Advanced Materials, pp.56-62 (1997). (SCI Journal), 1997
   103. , "Creep Behavior of Carbon-fiber-reinforced Polyetheretherketone (PEEK) [45]4S Laminated Composites (I)" , Composites Part B, Vol. 28B, pp.407-417 (1997). (SCI Journal), 1997
   104. N.H. Tai, C.Y. Lee and S.K. Chen, "Morphological Investigations of Pultruded Carbon Fiber Bundles Used as Electrodes for Aquafuel Generatio" , Carbon, Vol.35, No.10-11, pp.1674-1675 (1997). (SCI Journal), 1997
   105. W.C. Chang, H.T. Chao, N.H. Tai and C.C.M. Ma, "Microstructure and Oxidation Resistance of SiC Coated Carbon/Carbon Composites via Pressureless Reaction Sintering" , J. of Materials Science, Vol. 31, pp.649-654 (1996). (SCI Journal), 1996
   106. C.C.M. Ma, N.H. Tai, W.C. Chang and Y.P. Tsai, "Morphologies, Microstructure and Mechanical Properties Change of Carbon/Carbon Composites During the CVI Densification Process" , Carbon, Vol. 34, No. 10, pp.1175-1179 (1996). (SCI Journal), 1996
   107. S.H. Lin, C.C.M. Ma and N.H. Tai, "Long Fiber Reinforced Polyamide and Polycarbonate Composites（II）Fatigue Behavior and Morphological Property" , Journal of Vinyl & Additive Technology, Vol. 2, No.1, pp.81-86 (1996). (EI Journal), 1996
   108. W.C. Chang, N.H. Tai and C.C.M. Ma, "Dynamic Mechanical Properties of Carbon-Carbon Composites" , Journal of Materials Science, Vol. 30, pp.1225-1232 (1995). (SCI Journal), 1995
   109. C.C.M. Ma, N.H. Tai, S.H. Wu, S.S. Lin and J.F. Wu, "Fatigue Behavior of Quasi-isotropic Carbon Fiber/PEEK Laminated Under Tension-Tension Loading" , Journal of Polymer Composites, Vol. 16, No. 3, pp.216-223 (1995). (SCI Journal), 1995
   110. N.H. Tai, C.C.M. Ma and S.H. Wu, "Fatigue Behavior of Carbon Fiber/PEEK Laminate Composites" , Composites, Vol. 26, pp.551-559 (1995). (SCI Journal), 1995
   111. S.H. Lin, C.C.M. Ma, N.H. Tai, S.H. Wu, J.F. Wu and J.M. Lin, "Effect of Frequency on the Fatigue Behavior of 〔45〕4S Laminate of Carbon Fiber Reinforced Polyetheretherketone （PEEK） Composites Under Tension-Tension Loading" , Journal of Polymer Research Vol.2, No.3, pp.171-178 (1995). (SCI Journal), 1995
   112. C.C.M. Ma, S.H. Lin and N.H. Tai, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading" , Advanced New Materials and Engineering New Technologies, edited by P.N. Prasad, J.E. Mark, and J.F. Tung, Plenum Press Co., New York, pp.53-68 (1995), 1995
   113. C.C. M. Ma, N.H. Tai, W.C. Chang and C.K. Fang, "Carbon/Carbon Composites with Surface Treated Carbon Fibers" , Polymer Materials., Encycl. (1995）, 1995
   114. C.C.M. Ma, N.H Tai, S.H. Wu, S.S. Lin, J.F. Wu, C.L. Ong, I.C. Wu and M.F. Sheu, "The Hygrothermal Effect on the Fatigue Behavior of Carbon Fiber/PEEK Laminate Composites (I)" , Journal of Polymer Research, Vol. 1, No. 1, pp.17-24 (1994). (SCI Journal), 1994
   115. N.H. Tai, T.W. Chou and C.C.M. Ma, "Effects of Deposition Mechanisms in the Modeling of Forced-Flow/Temperature-Gradient Chemical Vapor Infiltration" , Journal of the American Ceramic Society, Vol. 77, No. 3, pp.849-51 (1994). (SCI Journal), 1994
   116. C.C.M. Ma, N.H. Tai and W.C. Chang, "Effects of Processing Methods and Parameters on the Mechanical Properties and Microstructure of Carbon/Carbon Composites" , Journal of Materials Science, Vol. 29, pp.5859-5867 (1994). (SCI Journal) (文章之圖被取用為當期封面), 1994
   117. C.C.M. Ma, C.L. Lee and N.H. Tai, "Chemical Resistance of Carbon Fiber-Reinforced Polyether Ether Ketone and Polyphenylene Sulfide Composites" , Polymer Composites, Vol. 13, No. 6, p.435 (1992).(SCI Journal), 1992
   118. C.C.M. Ma, C.L. Lee, M.J. Chang and N.H. Tai, "Effect of Physical Aging on the Toughness of Carbon Fiber-Reinforced Polyether Ether Ketone and Polyphenylene Sulfide Composites (I)" , Polymer Composites, Vol. 13, No. 6, p.441 (1992). (SCI Journal), 1992
   119. C.C.M. Ma, C.L. Lee, M.J. Chang and N.H. Tai, "Hygrothermal Behavior of Carbon Fiber-Reinforced Polyether Ether Ketone (PEEK) and Polyphenylene Sulfide (PPS) Composites.I" , Polymer Composites, Vol. 13, No. 6, p.448 (1992). (SCI Journal), 1992
   120. N.H. Tai and T.W. Chou, "Modeling of the Improved CVI Processing for Ceramic Composites Fabrication" , Journal of the American Ceramic Society, Vol. 73, No. 6, pp. 1489-1498 (1990). (SCI Journal), 1990
   121. N.H. Tai and T.W. Chou, "On the Deposition Mechanism of Al2O3 in the CVI Process for Forming Ceramic Composites" , Journal of Material Research Society, Vol. 5, No. 10, pp. 2255-2256 (1990). (SCI Journal), 1990
   122. N.H. Tai and T.W. Chou, "Analytical Modeling of Chemical Vapor Infiltration (CVI) in Fabrication of Ceramic Composite" , Journal of the American Ceramic Society, Vol. 72, No. 3, pp. 414-420 (1989). (SCI Journal), 1989
2. Symposium Papers & Conference Proceedings
   1. Yung-His Chuang, Nyan-Hwa Tai, Chi-Young Lee, "Transfer sintered TiO2 film onto ITO/PET substrate for flexible gel type dye sensitized solar cell" , 中國材料科學學會, 2011年材料年會，100年9月19-22日，台北世貿南港展覽館, 2011-09
   2. Nguyen Duc Dung, Yu-Lun Chueh, Nyan-Hwa Tai, "Controlled synthesis of graphene for flexible and transparent conducting films by a rapid heating and cooling CVD system" , Carbon 2011, Shanghai, China, July 24-29 2011, 2011-07
   3. Chiao-Heng Tsao , Nyan-Hwa Tai and Chi-Young Lee, "Fabrication of Silicon Nanowire Array Through the Metal-induced Wet Chemical Etching Method and Its Photovoltaic Properties" , 11thJoint Symposium on the Materials Science and Engineering for the 21st Century, Nanyang Technological University, Singapore, June 19-21 2011, 2011-06
   4. K. J. Sankaran, P. T. Joseph, H. C. Chen, N. H. Tai,and I. N. Lin, "Influence of substrate temperature on the microstructure and properties of ultrananocrystalline diamond films prepared using Ar/CH4 plasma" , 2011 AVS International Plasma Workshop (2011, March 22-25), (Poster Award), 2011
   5. 蔡宗岩，戴念華, "以化學氣相沉積法製作奈米碳管圖樣以及其在軟性基板上的應用" , 第七屆兩岸複合材料研討會，哈爾濱，遼寧，Jan. 19-22 (2010), 2010
   6. T.Y. Tsai, H.M. Chen, N.H. Tai, and T.W. Chou, "Syntheses of Carbon Nanotubes in the Forms of Array, Fluff, and Cable" , 12th International Ceramics Congress-Facing the Challenge of Innovation, Montecatini, Terme, Yuscany, Italy, June 6-11, 2010, 2010
   7. Tsung-Yen Tsai, Shih-Hao Tseng, Nyan-Hwa Tai, and Meng-Kao Yeh, "Synthesis of Carbon Nanotubes and Its Applications in Flexible Field Emission Device and Composites" , ICCM-17, Edinburgh, England, July 22-27 (2009), 2009
   8. Nyan-Hwa Tai, Chih-Kuang Sun, Yin-Ju Chen, Ming-Chuen Yip, Chi-Yuan Huang, "Investigation on the Electromagnetic Interference Shielding Efficiency of CNTs/nanocomposites" , nt09, Beijing, China, June 22-26 (2009), 2009
   9. Hsin Mao Chen, Jia-Rong Liang, Yin Ju Chen, Nyan-Hwa Tai, "Application of the Taguchi analytical method to optimize the growth parameters of single-walled carbon nanotubes in a vertically floating catalyst system" , nt09, Beijing, China, June 22-26 (2009), 2009
   10. Shih-Hao Tseng, Nyan-Hwa Tai, Tsung-Yen Tsai, and Yu-An Li, "Field emission properties of the vertically aligned carbon nanotubes synthesized through the cold-walled chemical vapor deposition process using secondary heating elements" , nt09, Beijing, China, June 22-26 (2009), 2009
   11. Ying-Chieh Chen, Hung-Chi Wu, Huang-Chin Chen, Keng-Fu Liu, Chi-Young Lee, I-Nan Lin, Nyan-Hwa Tai, "Enhancement of field emission properties for silicon nanowires via the coating of nitrogen-doped ultrananocrystalline diamond" , NDNC, Traverse City MI, (2009), 2009
   12. Huang-Chin Chen, Keng-Fu Liu, Nyan-Hua Tai and I-Nan Lin, "On the mechanism of enhancing the nucleation behavior of UNCD films by Mo-coating : the TEM study" , NDNC, Traverse City MI, (2009), 2009
   13. 蔡宗岩，李炤佑，戴念華，段維新, "轉印垂直排列奈米碳管圖案於塑膠基板上以應用於可撓性電子與場發射元件" , 第八屆兩岸碳材料研討會，瀋陽，遼寧，Dec. 28-31 (2009), 2009
   14. N. H. Tai, H. M. Chen, Y. J. Chen, S. H. Tseng, C. K. Sun, M. C. Yip, C. Y. Huang, "Synthesis of Carbon Nanotubes in a Vertical Tube Furnace and Their Applications in Electromagnetic Insulation Shielding" , The 1st Joint Canadian & American Technical Conference, Sept. 15-17, University of Delaware, USA, 2009
   15. Tsung-Yen Tsai and Nyan-Hwa Tai, "Syntheses of Carbon Nanotube Forest and Array and Their Application in Flexible Field Emission Device" , International workshop on Physics of Semiconductor and Devices (IWPSD-09), New Delhi, India, December 15-19, 2009, 2009
   16. 陳鑫錨，梁家榮，陳盈儒，曾士豪，蔡宗岩，戴念華, "以化學氣相沉積法製作奈米碳管圖樣、球團與線紗" , 第八屆兩岸碳材料研討會Keynote，瀋陽，遼寧，Dec. 28-31 (2009), 2009
   17. 葉孟考，戴念華，吳宗憲, "以實驗與有限單元法探討骨水泥之機械性質" , 中華民國力學學會第32屆會議，台灣嘉義中正大學2008年11月28-29日, 2008-11
   18. P. T. JOSEPH, N. H. TAI, H. F. CHENG, I. N. LIN, "Nitrogen doped ultrananocrystalline diamond films as N-type window materials for solar cell applications" , International Conference on Solar Cells, IC-SOLACE, Kochi, India, Jan. 21-23, 2008, 2008-01
   19. 戴念華, "Synthesis and Applications of Carbon Nanotubes" , 兩岸清華大學奈米科技研討會，北京，Oct. 27-28 (2008), 2008
   20. Y. C. Chen, X. Y. Zhong, A. Konicek, D. S. Grierson, N. H. Tai, I. N. Lin, B. Kabius, J. M. Hille, "Fundamentals of Smooth Ultra-nanocrystalline Diamond Films Via Low Pressure Bias-Enhanced Nucleation and Growth" , NDNC, 2008, Taipei, 2008
   21. Jia-Rong Liang, Shih-Hao Tseng, Tsung-yen Tsai, Meng-Kao Yeh and Nyan-Hwa Tai, "Synthesis of carbon nanotubes and its applications in composites and field emission light" , ICCE-16, July 20-26, 2008 in Kunming, China, 2008
   22. 戴念華, "Synthesis and Applications of Carbon Nanotubes" , 兩岸清華大學納（奈）米材料科技學術研討會，Oct. 27-28, 2008, 2008
   23. 戴念華, "Bactericidal properties of Multi-walled Carbon Nanotubes" , 第六屆兩岸複合材料研討會, Nov. 21-22, 2008, 2008
   24. 許惠珍，彭淑芬，曾士豪，蔡宗岩，戴念華，宋信文, "多壁奈米碳管對於大腸桿菌的抑菌活性之研究" , 中國材料科學學會, 2008年材料年會，97年11月21-22日，台北科技大學, 2008
   25. 林坤賢，曾士豪，蔡宗岩，陳伯毅，戴念華，葉孟考, "電場校應對於成長單壁奈米碳管影響之研究" , 中國材料科學學會, 2008年材料年會，97年11月21-22日，台北科技大學, 2008
   26. 賴冠樺，戴念華，李紫原, "利用交流阻抗法探討染料敏化型太陽能電池之內電阻對轉換效率的影響" , 中國材料科學學會, 2008年材料年會，97年11月21-22日，台北科技大學, 2008
   27. 陳宗漢，蔡宗岩，謝坤哲，張士欽，戴念華，陳學禮, "Two-dimensional metallic nanobowl array transferred onto thermoplastic substrates by microwave heating of carbon nanotubes" , 中國材料科學學會, 2008年材料年會，97年11月21-22日，台北科技大學(優等獎), 2008
   28. Shih-Hao Tseng and Nyan-Hwa Tai, "Effects of Fe2SiO4 cluster formation on the electric properties of single walled carbon nanotubes during camera flash" , 2008 MRS Fall Meeting, December 1-5, 2008, Boston, USA, 2008
   29. 粱家榮，曾士豪，蔡宗岩，戴念華，葉孟考, "Synthesis of carbon nanotubes and its applications in composites and field emission light" , 第七屆兩岸碳材料研討會，太原，山西，July 23-25 (2008), 2008
   30. P. T. Joseph，戴念華，鄭秀鳳，林喻男, "Ultrananocrystalline diamond films for transparent protective coating applications" , 中國材料科學學會，96年11月16-17日，交通大學, 2007-11
   31. 楊杰舜，曾士豪，蔡宗岩，戴念華, "上閘極單壁奈米碳管場效電晶體之研究" , 中國材料科學學會，96年11月16-17日，交通大學, 2007-11
   32. Nyan-Hwa Tai, "Mechanical Properties of Nanocomposites Reinforced by Single-walled Carbon NanotubesMechanical Properties of Nanocomposites Reinforced by Single-walled Carbon Nanotubes" , 5th Cross Strait Conference for Composite Materials, Oct. 22~27, Shanghai, China (2006). (Invited Presentation), 2006-10
   33. Nyan-Hwa Tai, "Synthesis of carbon nanotubes fluff and cable and investigation its applications in field emission light and composites" , UK-Taiwan Nanosicence and Nanotechnology Symposium, London, Oct. 6-7, (2006). (Invited Presentation), 2006-10
   34. Nyan-Hwa Tai, Meng-Kao Yeh, Shih-Hao Tseng, Chien-Chao Chiu, Tsung-Yen Tsai, Jia-Hau Liu, and Tai-Hao Peng, "Synthesis of Carbon Nanotubes and its Applications in Composites and field Emission Light" , Inter. Conf. Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, Vancouver, Canada July 4-8, (2006). (Invited Presentation), 2006-07
   35. Nyan-Hwa Tai, "Technology and Applications of Carbon Nanotubes" , Workshop on Nano- fabrication: Fundamentals and Applications, October 20, 2006, National Taiwan University. July 4-8, (2006). (Invited Presentation), 2006-07
   36. Shih-Hao Tseng and Nyan-Hwa Tai, "Oxidation of embedded iron clusters in CNTs under photoflash exposure" , NANOTUBE 2006, June 18-23, Nagona, Japan, 2006-06
   37. Nyan-Hwa Tai, "Synthesis of Carbon Nanotubes and its Applications in Composites, Field Emission Lighting, and Electromagnetic Interference Shielding" , 2006 Cross Strait Nanotechnology Conference，Tatung Univ,，April 24-25, (2006). (Invited Presentation), 2006-04
   38. Nyan-Hwa Tai, Meng-Kao Yeh, Shih-Hao Tseng, Chien-Chao Chiu, Tsung-Yen Tsai, Jia-Hau Liu, and Tai-Hao Peng, "Synthesis of Carbon Nanotubes and its Applications in Composites and field Emission Light" , Inter. Conf. Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, Vancouver, Canada July 4-8, (2006). (Invited Presentation), 2006
   39. Nyan-Hwa Tai, Meng-Kao Yeh, Tai-Hao Peng, "Mechanical Properties of Nanocomposites Reinforced by Single-walled Carbon Nanotubes" , 第五屆海峽兩岸複合材料研討會， Oct. 22~26, 2006，上海、溪口, 2006
   40. 周正賢, 林永振, 戴念華, 黃金花, 林諭男, "以氧化鋁薄膜製作薄膜體聲波濾波器之應用" , 中國材料科學學會，94年11月24-25日，淡江大學, 2005-11
   41. 孫志光, 戴念華, 黃繼遠, "奈米碳管複合材料電磁波屏蔽性質之研究" , 中國材料科學學會, 2005年材料年會，94年11月24-25日，淡江大學, 2005
   42. Nyan-Hwa Tai, Meng-Kao Yeh, Jia-Hau Liu, Chien-Hsin Yang, "Fabrication and characterization of nanocomposites reinforced by carbon nanotubes - (2) Testing of mechanical properties" , 4th Cross Strait Ceramic and Metal Matrix Composite Conference, Tainan, Taiwan (2005). (Invited Presentation), 2005
   43. Meng-Kao Yeh, Nyan-Hwa Tai, Jia-Hau Liu, "Mechanical Characterization of CNTs/Phenolic Composites" , The 4th Australasian Congress on Applied Mechanics, 16th ~18th, Feb. 2005, Melbourne, Victoria, Australia, 2005
   44. Nyan-Hwa Tai, "Synthesis and applications of Carbon Nanotubes in Composites and Field emission Lamp" , Carbon Fiber Conference，SAMPE-Taiwan Chapter，Dec. 4 (2004) (Invited Presentation). (Invited Presentation), 2004-12
   45. Tsung-Yen Tsai, Nyan-Hwa Tai, and I-Nan Lin, "Carbon Nanotube for Field Emission Cathode Prepared by the Screen Printing Method" , 3rd Cross Strait Conference for Carbon Materials, Tai-chung, Taiwan，Oct. 16 (2004). (Invited Presentation), 2004-10
   46. Nyan-Hwa Tai, Kun-Yu Lia and I-Nan Lin, "Preparation of PNN-PZT Thick films on Pt coated silicon substrates by using Laser-Lift-Off process" , 16th International Symposium on Ferroelectrics, April 5-8, ISIF 2004, Gyeongju, Korea, 2004
   47. Nyan-Hwa Tai, Tsung-Yen Tsai, and I-Nan Lin, "Influence of electrode configuration on the electron emission properties of multi-walled carbon nanotubes" , 2004 Nanotechnology Conference and Trade Show, March 7-11, 2004, Boston, Massachusetts, U.S.A., 2004
   48. Nyan-Hwa Tai, I-Chang Chiu , Chi-Young Lee, "Investigation on the Synthesis of One-dimensional Carbon Materials in the Chemical Vapor Deposition Process" , Workshop on Selective, Patterned and Self-assembled Growth of Nano-structures, Hong Kong, Jan. 5-8, (2003), 2003
   49. Nyan-Hwa Tai, Chi-Young Lee, I-Chang Chiu, and I-Nan Lin, "Effects of Electric Field on the Growth of One-dimensional Carbon Materials in the Chemical Vapor Deposition Process" , Nanotechnology and Trade Show, San Francisco, California, U.S.A., February 23-27, (2003), 2003
   50. Nyan-Hwa Tai, Meng-Kao Yeh, Chia-Hao Liu, Hsiang-Ming Hsueh, Chan-hsin Yang, "Synthesis of Carbon Nanotubes and Characterization of CNTs/Phenolic Composites" , ICCM-14, San Diago, CA, USA, July 14-18, (2003), 2003
   51. Hsiang-Ming Hsoeh, Nyan-Hwa Tai Chi-Yuan Lee, "Electrochemical Properties of the Multi Wall Carbon Nanotube Electrode for Secondary Lithium-ion Battery" , Conference for Nanotechnology, Greece, Aug. 29-Sept.13 (2003), 2003
   52. Tsung-Yen Tsai, Nyan-Hwa Tai, and I-Nan Lin, "Characteristics of Carbon Nanotube Electron Field Emission Devices Prepared by LTCC Process" , Diamond-2003, Salzburg, Austria, (2003), 2003
   53. H.M. Hseuh, N.H. Tai, T.P. Perng, S.D. Chyou, M.K. Yeh, C.H. Liu, "Fabrication and Characterization of Nanocomposites Reinforced by Carbon Nanotubes – (1) Synthesis of Carbon Nanotubes" , Proceedings of the 3rd Cross-strait Conference on Composites Materials, Key Engineering Materials, V. 249, p 65, Wuhen, China, Oct.9-10 (2003), 2003
   54. 林永振，周正賢，戴念華，黃金花，林諭男, "電感式耦合電漿化氣相沉積法低溫成長氮化鋁" , 中國材料科學學會，2003年材料年會，92年11月21-22日，崑山科技大學, 2003
   55. Hsiang-ming Hseuh, Nyan-Hwa Tai, Tong-ping Perng, San-Der Chyou, "Fabrication and Characterization of Nanocomposites Reinforced by Carbon Nanotubes – (1)Synthesis of Carbon Nanotubes" , 3rd Cross Strait Ceramic and Metal Matrix Composite Conference, Wuhan, China (2003). (Invited Presentation), 2003
   56. Nyan-Hwa Tai, Yu-long Lee, Cheng-Hsiung Lin, and I-Nan, Lin, "Ferroelectric Properties of Pb(Zr1-XTiX)O3 Graded Thin Films Prepared by Pulsed Laser Deposition Process" , Integrated Ferroelectrics (ISIF), Japan, May (2002), 2002
   57. Nyan-Hua Tai, Yu-Mei Shen, Tong-Hsu, and I-Nan Lin, "Thick Pb(Ni1/3Nb2/3)O3-(Pb1-x) (Ti1-yZry)O3 Films Prepared by Tape-casting" , Integrated Ferroelectrics (ISIF), Nara, Japan, May (2002), 2002
   58. Nyan-Hua Tai, Yu-Mei Shen, Tong-Hsu, and I-Nan Lin, "Preparation of thick piezoelectric films on silicon substrate by laser lift-off technique" , IFFF, Nara, Japan, May (2002), 2002
   59. Y.J. Shu, C. C. Chiu, N.H. Tai, I.N. Lin, C. T. Chia, "Carbon Nanotube Formation on the Surface of Diamond-Like Carbon Film" , 13 European on Diamond, Diamond-like Materials, Carbon Naotubes, Nitrides & Silicon Carbide, 8-13, Sept. 2002, Granada, Spain, 2002
   60. 李昆育，戴念華，林諭男, "以固態法製備PNN-PZT粉末及其特性量測" , 中國材料科學學會，2002年材料年會，91年11月22-23日，台灣大學 (poster), 2002
   61. 方柏超，陳瑞凱，林樹均，鄭慧雯，徐統，李裕安，戴念華, "鋅陽極製程因素探討" , 中國材料科學學會，2002年材料年會，91年11月22-23日，台灣大學(poster), 2002
   62. 邱建超，戴念華，賈至達，林諭男, "以熱處理鑽石與類鑽石薄膜成長奈米碳管之研究" , 中國材料科學學會，2002年材料年會，91年11月22-23日，台灣大學 (poster), 2002
   63. 蔡宗岩，戴念華，鄭秀鳳，林諭男, "以溶凝法製備催化劑成長奈米碳管之場發射性質研究" , 中國材料科學學會，2002年材料年會，91年11月22-23日，台灣大學 (poster), 2002
   64. 邱奕璋，戴念華，李紫原，林諭男, "外加電場對化學氣相沉積法製備一維碳材之製程參數探討與性質研究" , 中國材料科學學會，2002年材料年會，91年11月22-23日，台灣大學 (poster), 2002
   65. 薛詳明，蔡宗岩，戴念華，李紫原, "以懸浮觸媒法量產奈米碳纖維之研究" , 中國材料科學學會，2002年材料年會，91年11月22-23日，台灣大學 (poster), 2002
   66. 戴念華，李紫原，陳金銘, "以酚醛樹脂為前驅體製作碳粉與探討其對鋰離子二次電池充放電性之影響" , 兩岸清華大學九十週年校慶尖端材料科技研討會，北京 清華大學，四月二十七日，(2001), 2001
   67. Nyan-hwa Tai and Che-Fu Chen, "Effects of processing parameters on the growth of SiC Nanofibers in the fabrication of carbon/SiC nanocomposites" , ICCM-13, Beijing, China, June, 25, (2001), 2001
   68. Nyan-Hwa Tai, Cheng-Hsiung Lin, Yi-Nein Lai, and I-Nan Lin, "Effect of nano-powder incorporation on characteristic of PZT films" , 10th International Meeting on Ferroelectricity, Madrid Spain, Sep. 3-7, 2001, 2001
   69. Nyan-Hwa Tai and Che-Fu Chen, "Nanofiber Growth in the Fabrication of Ceramic Matrix Nanocomposites Through Pulsed Chemical Vapor Infiltration (PCVI)" , 第二屆海峽兩岸碳材料研討會論文集，中興大學，十一月，(2001), 2001
   70. 陳瑞凱，鄭慧雯，李裕安，徐統，戴念華, "鋅陽極製程因素探討" , 上海輕型電動車研討會，上海，中國 (2001), 2001
   71. Chien-Chao Chiu, Nyan-Hwa Tai, and I-Nan Lin, "Insitu Raman Examination of Carbon Nanotubes Formation on the Surface of Diamond Films for Improving Electron Field Emission Properties" , Tsukuba Symposium on Carbon Nanotube in Commemoration of the 10th Anniversary of Its Discovery, Oct.3-5, 2001, Tsukuba, Japan, 2001
   72. Nyan-Hwa Tai and Che-Fu Chen, "Nanofiber Growth in the Fabrication of Ceramic Matrix Nanocomposites Through Pulsed Chemical Vapor Infiltration (PCVI)" , 12nd Cross Strait Ceramic and Metal Matrix Composite Conference,Tai-chung, Taiwan, Nov., (2001). (Invited Presentation), 2001
   73. Nyan-hwa Tai and Che-Fu Chen, "Fabrication of Carbon/SiC Nanocomposites Through the Slurry Impregnation and Pulse Chemical Vapor Infiltration (PCVI) Method" , 首屆海峽兩岸碳材料研討會論文集，上海，七月，(2000), 2000
   74. Meng-Kao Yeh, Nyan-Hwa Tai, Shyh-Shiuan Chou., "Mechanical Strength of Gr/PEEK Laminates Repaired after Low-Energy Impact" , The Second Asian-Australasian Conference on Composite Materials (ACCM-2000). Kyongju, Korea, 18-20 August, 2000, 2000
   75. 戴念華，李紫原，陳金銘，王富田, "不同前驅體所製作之碳粉及此碳粉添加奈米碳粉對鋰二次電池充放電性質之影響" , 首屆海峽兩岸碳材料研討會論文集，北京，清華大學，Oct. 13, (2000), 2000
   76. C.K. Kao, W.H. Lin, H. Chang, C.H. Tsai, N.H. Tai, C.C. Chi, I.N. Lin, "Optical Properties of Sol-Gel Derived SiO2 Thin Films" , Asian Meeting on Ferroelectrics, 12-15 Dec., 2000, PoluU, Hong Kong, China, 2000
   77. 戴念華，葉孟考，陳正松, "擬均向性碳纖維強化聚醚醚酮複材疊層板承受低能量衝擊並經修補後之靜態及拉伸-壓縮疲勞性質研究" , 第二十四屆中華民國力學學會年會暨全國力學會議，中壢，中原大學，十二月九、十日，(2000), 2000
   78. 戴念華，李紫原，王富田, "添加奈米碳粉於碳化環氧樹脂中以製備鋰二次電池碳電極之研究" , 中華民國材料學會年會，高雄，義守大學，十一月二十四、五日，(2000), 2000
   79. T. F. Chen, N. H. Tai, "Fabrication of Carbon/SiC nanocomposites Fabricated through Slurry Infiltration and Pulse Chemical Vapor Infiltration" , 1st Cross Strait Ceramic and Metal Matrix Composite Conference, Shanghai, China, July (2000). (Invited Presentation), 2000
   80. N.H. Tai，C. Y. Lee, C. M. Chen, F.T Wang, "Effects of carbon nanopowder on the electrode performance of lithium ion battery" , 1st Cross Strait Conference for Carbon Materials, Beijing, China，Oct. 13 (2000). (Invited Presentation), 2000
   81. J.M Lin, C.C.M. Ma, N. H. Tai, W.J. Wu and C.Y. Chen, "Preparation and Properties of SiC Modified Carbon/Carbon Composites by Carbothermal Reduction Reaction" , Antech Conference Proceedings of the 22nd ROC Polymer Symposium (1999), 1999
   82. 戴念華, 楊怡寬, 鄧禮成, "碳/碳複合材料之抗氧化能力及其氧化後之機械性質探討" , 第二十二屆高分子研討會 (poster)，新竹交通大學 (1999), 1999
   83. N.H. Tai, I.K. Yang and L.C. Deng, "Mechanical Properties Degradation of Carbon/Carbon Composites after Slight Oxidation" , 44th International SAMPE Symposium, Long Beach, CA, USA (1999), 1999
   84. J.M. Lin, C.C.M. Ma, N.H. Tai, W.J. Wu and C.Y. Chen, "SiC Modified Carbon/Carbon Composites by Carbothermal Reduction Reaction (I) Preparation and Properties" , Antech Conference (1999), 1999
   85. N. H. Tai, H.S. Kuo, J.H. Chern and C.P. Ju, "Processing and Tribological Behavior of Pulsed Chemical Vapor Infiltrated Carbon/Carbon Composites" , Taiwan-Austria Joint Conference, Cheng-Kung Univ., March 27, (1999). (Invited Presentation) , 1999
   86. N.H. Tai, K. P. Lee, H Hocheng and C.S. Liu, "Processing and Characterization of Carbon Fiber Reinforced Ceramic Nanocomposites" , EnCera ’98 & HT-CMC 3, Osaka, Japan (1998), 1998
   87. M.K. Yeh, N.H. Tai, Wen-Chi Tai and Nelson Lin, "Mechanical Strengths of Composite Plates Fabricated from Recycles Circuit Boards" , The First Asian-Australian Conference on Composite Materials, Osaka, Japan (1998), 1998
   88. 戴念華, 葉銘泉, 高鉦翔, "衝擊及熱循環負載對擬均向性Gr/PEEK複合材料之拉伸-壓縮疲勞行為之影響" , Annual Meeting of SAMPE-Taiwan Chapter, World Trade Center, Tai-chung (1998), 1998
   89. 陳志成, 劉顯光, 戴念華, "複合材料纏繞成型強化混凝土圓柱對衝擊後抗壓強度的影響與分析" , Annual Meeting of SAMPE-Taiwan Chapter, World Trade Center, Tai-chung (1998), 1998
   90. 戴念華, 葉銘泉, 曾志明, "衝擊及熱循環負載對擬均向性Gr/PEEK複合材料之拉伸-拉伸疲勞行為之影響" , 中國機械工程學會，第十五屆全國學術研討會 (1998), 1998
   91. M.C. Yip, C. M. Tseng and N.H. Tai, "Effects of Thermocycling on Fatigue Behavior of the Carbon/PEEK Composites" , The Third Int. Conf. On Fracture & Strength of Solids, Hong Kong (1997), 1997
   92. J.M. Lin, C. C.M. Ma, N.H. Tai, C. L. Ong, Y. C. Chang and M. F. Sheu, "Tension-Compression Fatigue Behavior of Carbon Fiber Reinforced Epoxy Laminates Before and After Low Energy Impact" , 20th ROC Polymer Symposium, National Tsing-Hua Univ. (1997), 1997
   93. N.H. Tai, M.K. Yeh, W.C. Tai, C. H. Yang and Nelson Lin, "Composite Plates Made with Recycled Circuit Board" , ICCE/4, Hawaii, USA (1997), 1997
   94. N.H. Tai, M. C. Yip, C. M. Tseng and H. C. Yu, "Fatigue Behavior of the Carbon/Epoxy and the Carbon/PEEK Composites Subjected to Low-energy Impact" , ICCM-11, International Conference for Composite Materials, Gold Coast, Australia (1997), 1997
   95. N.H. Tai, M.K. Yeh, W.C. Tai and Nelson Lin, "Composite Plates Made with Recycled Circuit Boards and Fibrous Mats" , Annual Meeting of SAMPE-Taiwan Chapter, World Trade Center, Tai-chung (1997), 1997
   96. N.H. Tai, C.C.M. Ma, J. M. Lin, G.Y. Wu, "Effects of Thickness on Impact and Fatigue Behaviors of the Quasi-Isotropic Gr/Epoxy Composites Before and After Low Energy Impacts" , Sept. 15-19, Japan, IUMRS-97, 1997
   97. 林士元, 劉顯光, 戴念華, "纏繞法之幾何參數對複合材料管件衝擊性能之影響分析" , 中國機械工程學會, 第十四屆全國學術研討會, 中央大學, 中壢 (1997), 1997
   98. C.C. M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Tension-Compression Fatigue Behavior of Carbon Fiber Reinforced Epoxy Quasi-Isotropic Laminated Composites Subjected to Low Energy Impact" , 41st International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1996), 1996
   99. C.C. M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites-[±45] 4S Laminate Under Tension-Tension and Tension-Compression" , 41st International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1996), 1996
   100. N.H. Tai, C.C.M. Ma, M.C. Yip, C.L. Lin and G.Y. Wu, "Influence of Low-Energy Impact on Fatigue Behavior of the Carbon/Epoxy Laminate Composites" , International Conference on Advanced Materials, Beijing, China (1996), 1996
   101. J.M. Lin, C.C. M. Ma, N.H. Tai, J.M. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu, "Tension-Compression Fatigue Behavior of [±45]8s Carbon Fiber Reinforced Epoxy Laminated Composites Before and After Low Energy Impact" , 19th ROC Polymer Symposium, National Tsing-Hua Univ. (1996), 1996
   102. 林士元, 劉顯光, 戴念華, "纏繞法製程及幾何參數對複材圓管機械性質的影響" , 中國機械工程年會, 台北 (1996), 1996
   103. N. H. Tai, M. C. Yip, C. L. Lin, "Fatigue behavior of Gr/Epoxy composites subjected low energy impact loading" , 1st Cross Strait Conference for Composite Materials, Taiwan, May, (1996). (Invited Presentation), 1996
   104. C.C.M. Ma, N.H. Tai, G.Y. Wu, S.H. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites (I) Quasi-Isotropic Laminate under Tension-Compression Fatigue Loading Test" , Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995), 1995-10
   105. C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites I. [±45] Laminate under Tension-Tension Loading" , ICCM-10, Vancouver, Canada (1995), 1995
   106. N.H. Tai, C.C.M. Ma, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites II. Quasi-isotropic Laminate under Tension-Tension Loading" , The 40th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1995), 1995
   107. S.H. Lin, C.C.M. Ma and N.H. Tai, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites under Tension-Tension Loading" , Abstract accepted, The 40th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1995), 1995
   108. W.C. Chang, H.T. Chao, N.H. Tai and C.C.M. Ma, "Effect of Silicon Carbide Coating on the Anti-oxidation of Carbon/Carbon Composites" , The 40th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1995), 1995
   109. S.H.Lin, C.C.M.Ma, and N.H. Tai, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading" , Society of Plastics Engineers, San Francisco, CA, USA (1995), 1995
   110. C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites, (I)[±45]4s Laminate under Tension-Tension Loading" , ICCM/10, British Columbia, Canada, (1995), 1995
   111. N.H. Tai, C.Y. Lee, and I.H. Liu, "SiC Coating Through Chemical Vapor Deposition and Reaction Sintering on Carbon/Carbon Composites" , ICCM/10, British Columbia, Canada (1995), 1995
   112. H.K. Liu, N.H. Tai and W.H. Chen, "Investigations on the Fabrication of Composite Materials Prepared Through Filament Winding" , ICCM/10, British Columbia, Canada (1995), 1995
   113. W.C. Chang, H.T. Chao, C.C.M. Ma and N.H. Tai, "Oxidation Behavior and Mechanisms of Carbon/Carbon Composites" , ICCM/10, British Columbia, Canada (1995), 1995
   114. C.C.M. Ma, S.H.Lin, L.H. Perng, N.H. Tai and H.F. Meng, "Mechanical Properties of Injection Molded Long Glass Fiber Reinforced Rubber Toughened Polyamide 6 Composite" , Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995), 1995
   115. C.C.M. Ma, N.H. Tai, G.Y. Wu, S.H. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites (II) [±45]4s Laminate under Tension-Tension and Tension-Compression Fatigue Loading Tests" , Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995), 1995
   116. 陳韋宏, 劉顯光, 戴念華, "纏絲法製造複合材料及其分析" , 中國材料年會, Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995), 1995
   117. Y.P. Tsai, W.C. Chang, N.H. Tai and C.C.M. Ma, "Densification of the Carbon-Carbon Composites Through the Isothermal Chemical Vapor Infiltration Process" , Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995), 1995
   118. C.C.M. Ma, N.H. Tai, S.H. Lin, S.H. Wu, J.F. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of [±45]4s Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (I) under Tension-Tension Loading at Various Frequencies" , ICCE/2, New Orleans, LA, USA (1995), 1995
   119. C.C.M. Ma, S.H. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites (II) Quasi-Isotropic Laminates under Tension-Tension Loading" , ICCE/2, New Orleans, LA, USA (1995), 1995
   120. N.H. Tai, W.C. Chang, C.C.M. Ma and Y.P. Tsai, "Fabrication of Carbon/carbon Composites Through the Chemical Vapor Infiltration" , ICCE/2, New Orleans, LA, USA (1995), 1995
   121. W.C. Chang, H.T. Chao, C.C.M Ma and N.H. Tai, "Oxidation Behaviors and Mechanisms of Carbon/Carbon Composites" , Society of Plastics Engineerings, San Francisco, CA, USA (1995), 1995
   122. N.H. Tai, Y.P. Tsai, C.C.M Ma and W.C. Chang, "Morphologies and Mechanical Properties of Carbon/Carbon Composites Densified Through CVI Process" , 18th ROC Polymer Symposium, National Tsing-Hua Univ. (1995), 1995
   123. C.C.M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites Subjected to Low Impact Energy (I) Quasi-Isotropic Laminated Tension-Compression Fatigue Test" , 18th ROC Polymer Symposium, National Tsing-Hua Univ. (1995), 1995
   124. C.C. M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites Subjected to Low Impact Energy (II) [±45]4S Laminated Tension-Compression Fatigue Test" , 18th ROC Polymer Symposium, National Tsing-Hua Univ. (1995), 1995
   125. N. H. Tai, W.C. Chang, C.C.M. Ma and Y.P. Tsai, "Processing and Modeling of Chemical Vapor Infiltration for Fabricating High Temperature Composites" , Taiwan-Austria Joint Conference, Kaohsiung College, Jan. 13-14, (1995). (Invited Presentation), 1995
   126. C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C.L., I.C. Wu and M.F. Sheu, "C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C.L., I.C. Wu and M.F. Sheu, "Creep Properties of [±45]4s Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (II)" , The 39th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1994), 1994-10
   127. H.T. Chao, C.C.M. Ma and N.H. Tai, "Ceramic Coating on the Carbon/Carbon Composites Through the Sol-Gel Technique" , 5th International Symposium on Ceramic Materials & Components for Engines, Shanghai, China (1994), 1994
   128. N.H. Tai, "Theoretical Modeling of the Chemical Vapor Infiltration Process for Fabricating Ceramic Matrix Composites" , 5th International Symposium on Ceramic Materials & Components for Engines, Shanghai, China (1994), 1994
   129. C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C.L., I.C. Wu and M.F. Sheu, "Fatigue Behavior of Quasi-Isotropic Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composite (I) Residual Strength Under Tension-Tension Loading" , Society of Plastics Engineers, San Francisco, CA, USA (1994), 1994
   130. C.C.M. Ma, N.H. Tai, W.C. Chang, C.K. Fang and H.T. Chao, "The Influence of Carbon Fiber Surface Treatment on the Mechanical Properties of Unidirectional Carbon/Carbon Composites" , Society of Plastics Engineers, San Francisco, CA, USA (1994), 1994
   131. C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C. L., I.C. Wu and M.F. Sheu, "Creep Behavior of [±45]4s Laminated Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (I)" , Society of Plastics Engineers, San Francisco, CA, USA (1994), 1994
   132. C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C.L., I.C. Wu and M.F. Sheu, "Fatigue Behavior of [±45]4s Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (II) under Tension-Tension Loading" , The 39th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1994), 1994
   133. C.C.M. Ma, N.H. Tai, W.C. Chang, C.K. Fang and H.T. Chao, "Investigations on the Mechanical Properties and Fracture Behaviors of 2-Dimensional Carbon/Carbon composites Fabricated with the Treated Carbon Fibers" , The 39th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1994), 1994
   134. 戴念華, "化學氣相滲入法製造陶瓷複合材料之理論分析" , 第二屆研究成果及應用技術發表會, 臺大工學院國際會議, 83年2月25-26日, 1994
   135. C.C.M. Ma, N.H. Tai and H.T. Chao, "Silicon Carbide Coatings on Carbon/Carbon Composites for Anti-oxidation" , Annual Conference of the Chinese Society for Materials Science (1994), 1994
   136. C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang, M.G. Sheu and Y.R. Yang, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset polymer Composites (I) Quasi-Isotropic Laminates Under Tension-Tension Loading" , Annual Conference of the Chinese Society for Materials Science (1994), 1994
   137. C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang, M. F. Sheu and Y. R. Yang, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites (I) [±45]4s Laminates Under Tension-Tension Loading" , Annual Conference of the Chinese Society for Materials Science (1994), 1994
   138. N.H. Tai, C.C.M. Ma and S.H. Wu, "Fatigue Behavior of the Graphite/PEEK Composites" , First International Conference on Composites Engineering (ICCE/1), New Orleans, LA, USA (1994), 1994
   139. C.C.M. Ma, N.H. Tai, W.C. Chang and H.T. Chao, "Oxidation Behaviors of Carbon/Carbon Composites" , 17th ROC polymer Symposium, National Tsing-Hua Univ. (1994), 1994
   140. J.F. Wu, C.C.M. Ma, C.S. Tsai, N.H. Tai, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu, "Damage Mechanism of Matrix Dominated Polymer Based Laminated Composites Under Fatigue Loading" , 17th ROC polymer Symposium, National Tsing-Hua Univ. (1994), 1994
   141. J.F. Wu, C.C.M. Ma, N.H. Tai, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu., "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites (III) Quasi-Isotropic Laminates Under Tension-Compression Loading" , 17th ROC polymer Symposium, National Tsing-Hua Univ. (1994), 1994
   142. S.H. Lin, C.C.M. Ma, N.H. Tai, J.F. Wu, J.M. Lin, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading" , 17th ROC polymer Symposium, National Tsing-Hua Univ., Univ. (1994), 1994
   143. N.H. Tai, "Theoretical Analysis of the Chemical Vapor Infiltration Process for Fabricating Laminated Ceramic Composites" , 中華民國尖端材料科技協會第三屆年會暨學術研討會, 民國八十三年十月7-8日, 1994
   144. N.H. Tai, C.C.M. Ma, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu., "Fatigue Behavior of Quasi-isotropic Lamiates of Carbon Fiber Reinforced Polymer Composites Under Tension-Tension Loading" , 中華民國尖端材料科技協會第三屆年會暨學術研討會, 民國八十三年十月7-8日。(本論文獲"1994尖端材料研討展示會"之學生論文競賽第二名), 1994
   145. C.C.M. Ma, W.C. Chang and N.H. Tai, "Dynamic Mechanical Properties of Carbon-Carbon Composites" , IUMRS-94-Taiwan (1994), 1994
   146. C.C.M. Ma, S.H. Lin, N.H. Tai, S.H. Wu, C.L. Ong, I.C. Wu and M.F. Sheu, "Fatigue Behavior of [±45]4s laminate Composites of Carbon Fiber Reinforced Polyetheretherketone (PEEK)" , IUPAC-94-Taiwan, Invited (1994), 1994
   147. C.C.M. Ma, S.H. Li and N.H. Tai, "Static ad Dynamic Mechanical Properties of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading" , IUPAC-94-Taiwan (1994), 1994
   148. N.H. Tai, C.C.M. Ma, J.F. Wu, S.H. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Quasi-isotropic Gr/PEEK and Gr/Epoxy Lamiates" , IUPAC-94-Taiwan (1994), 1994
   149. N.H. Tai and C.C.M. Ma, "Theoretical Analysis of the Forced-Flow, Temperature-Gradient Chemical Vapor Infiltration (FCVI) Process for Forming Ceramic Matrix Composites" , International Conference on Advanced Composites, Wollongong, Australia, Proceeding of Advanced Composites, '93, p.1405 (1993), 1993
   150. C.C.M. Ma, W.C. Chang and N.H. Tai, "Effects of Precursor Thermal Aging and Fiber Arrangement on the Properties of Carbon/Carbon (C/C) Composites" , International Conference on Advanced Composites, Wollongong, Australia, Proceeding of Advanced Composites '93, p.1331 (1993), 1993
   151. C.C.M. Ma and N.H. Tai, "Fatigue Behavior of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Laminated Composites (IV)" , The 38th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1993), 1993
   152. C.C.M. Ma and N.H. Tai, "Creep Properties of Carbon Fiber Reinforced PEEK Laminated Composites (III)" , The 38th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1993), 1993
   153. C.C.M. Ma, N.H. Tai, W.C. Chang, C.K. Fang and H.T. Chao, "The Influence of Carbon Surface Treatment on the Mechanical Properties and Fracture Behaviors of Carbon/Carbon Composites" , Annual Conference of the Chinese Society for Materials Science (1993), 1993
   154. C.C.M. Ma, S.H. Wu, S.H. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "The Hygrothermal Effect on the Fatigue Behavior of Carbon Fiber/Peek Laminate Composites after Impact(I)" , Annual Conference of the Chinese Society for Material Science (1993), 1993
   155. C.C.M. Ma, S.H. Wu, S.S. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "Fatigue Behavior of Quasi-Isotropic Laminate of Carbon Fiber Reinforced Polytheretherketone(PEEK) Composites: (II)Under Tension-Compression Loading" , 16th ROC polymer Symposium, National Tsing-Hua Univ. (1993), 1993
   156. C.C.M. Ma, S.H. Wu, S.S. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "Fatigue Behavior of [90]16 Laminate of Carbon Fiber Reinforced Polytheretherketone (PEEK) Composites: (I)Under Tension Loading" , 16th ROC polymer Symposium, National Tsing-Hua Univ. (1993), 1993
   157. N.H. Tai, C.C.M. Ma, W.C. Chang, C.K. Fang and H.T. Chao, "The Influence of Carbon Surface Treatment on the Mechanical Properties and Fracture Behavior of Carbon/Carbon Composites" , 16th ROC Polymer Symposium, National Tsing-Hua Univ. (1993), 1993
   158. N.H. Tai, C.C.M. Ma, W.C. Chang and T.W. Chou, "Processing of Carbon/Carbon Composites Based Upon Chemical Vapor Infiltration and Polymer Pyrolysis Methods" , The Ninth International Conference on Composite Materials (ICCM/IX), CERAMIC MATRIX COMPOSITE, Modelling and Processing Science, Volume III, p.695, Madrid, Spain (1993), 1993
   159. N.H. Tai, C.C.M. Ma and T.W. Chou, "Modeling of the Self-Adjusted Reactant Flow Path Method For CVI of Ceramic Matrix Composites" , The Ninth International Conference on Composite Materials (ICCM/IX), CERAMIC MATRIX COMPOSITE AND OTHER SYSTEMS," Volume II, p.163, Madrid, Spain (1993), 1993
   160. N.H. Tai, C.C.M. Ma, W.C. Chang, C.K. Fang and H.T. Chao, "Effects of the Surface Treatment on the Mechanical Properties and Morphology of Carbon Fiber" , The 9th International Conference on Composite Materials (ICCM/9), CERAMIC MATRIX COMPOSITE AND OTHER SYSTEMS, Volume II, p. 629, Madrid, Spain (1993), 1993
   161. C.C.M. Ma, C.J. Chang, C.K. Fang and N.H. Tai, "Pultruded Fiber Reinforced Polyfurfuryl Alcohol Composites-I. Feasibility and Mechanical Properties" , Proceedings of the 1992 Annual Conference of the Chinese Society for Materials Science, pp.518-519 (1992), 1992
   162. C.C.M. Ma, W.C. Chang and N.H. Tai, "Effects of Precursor Thermal Aging Fiber Arrangement on the Properties of Carbon/Carbon Composites" , Proceedings of the 1992 Annual Conference of the Chinese Society for Materials Science, pp.528-529 (1992), 1992
   163. N.H. Tai and T.W. Chou, "Modeling and Analysis of Processing of Ceramic Matrix Composites" , 24-E-2, Proceedings of the International Conference on Composite Materials (ICCM/8), Honolulu, Hawaii, USA (1991), 1991
   164. N.H. Tai and T.W. Chou, "Theoretical Modeling of the Chemical Vapor Infiltration Process for Forming Highly Densified Ceramic/Ceramic Composites" , Proceeding of the 119th TMS Annual Meeting, Metal and Ceramic Matrix Composites: Processing, Modeling & Mechanical Behavior, The Metallurgical Society, Anaheim, CA, USA, pp.303-309 (1990), 1990-10
   165. N.H. Tai and T.W. Chou, "Analytical Simulation of An Improved CVI Process for Forming Highly Densified Ceramic Composites" , Material Research Society Symposium Proceedings, Vol. 168, pp.61-66 (1990), 1990
   166. N.H. Tai and T.W, "Modeling of the Isothermal CVI Process with Pressure Gradients for Forming Ceramic Composites" , 92nd Annual Meeting of the American Ceramic Society, Dallas, TX, USA (1990), 1990
   167. N.H. Tai and T.W. Chou, "Modeling of Chemical Vapor Infiltration (CVI) Process under Pressure and Temperature Gradients for Ceramic Matrix Composites Processing" , 91st Annual Meeting of the American Ceramic Society, 81-SI-89, Indianapolis, IND, USA (1989), 1989
   168. N.H. Tai and T.W. Chou, "Modeling of the Improved CVI Process for Ceramic Composites Fabrication" , Annual Symposium of the Center for Composite Materials, University of Delaware, Newark, DE, USA (1989), 1989
   169. N.H. Tai and T.W. Chou, "Effects of Manufacturing Parameters on the Chemical Vapor Infiltration of Ceramic/Ceramic Composites" , Proceedings of the 4th Technical Conference on Composite Materials, American Society for Composites, Blacksburg, VA, USA, pp.317-322 (1989), 1989
   170. N.H. Tai and T.W. Chou, "Processing of Ceramic Matrix Composites" , Proceedings of the Seventh International Conference on Composite Materials (ICCM/7), Guangzhou, China, (1989), 1989
   171. N.H. Tai and T.W. Chou, "Modeling of Chemical Vapor Infiltration (CVI) in Al2O3/SiC Composites Processing" , Proceedings of a joint NASA/DOD, Conference, NASA Conference Publication No.3018. Edited by John d. Buckley, Cocoa Beach, FL, USA, pp.237-245 (1988), 1988
   172. N.H. Tai and T.W. Chou, "Theoretical Analysis of Chemical Vapor Infiltration in Ceramic/Ceramic Composites" , Material Research Society Symposium Proceedings, Vol. 120, pp.185-192 (1988), 1988
   173. T.W. Chou and N.H. Tai, "Modeling of Processing of Ceramic Matrix Composites" , ASME Winter Annual Meeting, Chicago, ILL, USA (1988), 1988
   174. N.H. Tai and T.W. Chou, "Modeling of Fabrication of Ceramic Matrix Composites" , Annual Symposium of the Center for Composite Materials, University of Delaware, Newark, DE, USA (1988), 1988
   175. T.W. Chou and N.H. Tai, "Fiber Composite Materials Proceedings of Technical Program" , 1988 Annual Convention of Chinese Institute of Engineers in USA., Greater New York Chapter, Newark, NJ, USA, pp.122-126 (1988), 1988
3. Patent
   1. 戴念華，邱建超，蔡宗岩, "垂直奈米碳管陣列之場發射陰極元件的製作方法及其製品" , 中華民國專利，I 312165號 (2009), 2009
   2. 戴念華，楊健鑫，曾士豪, "製作高純度單壁奈米碳管及雙壁奈米碳管絨球及紗束" , 中華民國專利，I 296610號 (2008), 2008
   3. 李紫源, 戴念華, 謝署旭, "用於製備鋯鈦酸鉛奈米粉末之方法" , 中華民國專利, I 271386號, 2006
   4. 戴念華, 林諭男, 蔡宗岩, "場發射奈米碳管電極及其製造方法" , 中華民國專利, I 231518號, 2005
   5. 陳瑞凱, 李紫原, 戴念華, "用碳纖束製造水合燃料之方法" , 中華民國專利150052，(91年2月11日~107年5月14日), 2002
   6. C.Y. Lee, S.K. Chen and N.H. Tai, "Process for Producing Aquafuel by using Carbon Fiber Bundle" , US Patent 6217713B1(2001/4/17~2018/7/2), 2001
   7. Nyan-Hwa Tai, Chien-Chao Chiu, Tsung-Yen Tsai, "CARBON NANOTUBE ARRAY ELEMENT AND METHOD FOR PRODUCING THE SAME" , Patent pending, USA,
4. Others

Research ProjectOverview

Year	Project Name	Participator	Job	Period	Cooperative Organization	Remarks
2012		Nyan-Hwa Tai		2012-08 ~ 2015-07
2011		Nyan-Hwa Tai		2011-10 ~ 2012-09
2010		Nyan-Hwa Tai		2010-01 ~ 2011-12
2009	以奈米碳管為基礎的軟性電子元件之研究(1/3)	Nyan-Hwa Tai	Manager	2009-08 ~ 2012-07	National Science Council
2009	具高導電率及低熱導係數熱電材料之製程研究	Nyan-Hwa Tai	Manager	2009-01 ~ 2009-12	ITRI
2009	奈米材料對癌細胞生長與移轉的研究	Nyan-Hwa Tai	Manager	2009-03 ~ 2009-12	教育部
2008	單壁及雙壁奈米碳管之製作及以奈米碳管製作光源發射子及此發光元件之均勻性與散熱能力的改善(3/3)	Nyan-Hwa Tai	Manager	2008-08 ~ 2009-07	National Science Council
2008	大專生參與專題研究計畫-選區成長超細氧化鋅奈米線並應用於場發射元件	Nyan-Hwa Tai	Manager	2008-07 ~ 2009-02	National Science Council
2007	單壁及雙壁奈米碳管之製作及以奈米碳管製作光源發射子及此發光元件之均勻性與散熱能力的改善(2/3)	Nyan-Hwa Tai	Manager	2007-08 ~ 2008-07	National Science Council
2006	高均勻度PECVD or Thermal CVD 成長CNT技術研究	Nyan-Hwa Tai	Manager	2006-01 ~ 2006-12	Industrial Technology Research Institute
2006	奈米碳管之製作與性質分析	Nyan-Hwa Tai	Manager	2006-01 ~ 2006-12	Ministry of Education
2006	單壁及雙壁奈米碳管之製作及以奈米碳管製作光源發射子及此發光元件之均勻性與散熱能力的改善(1/3)	Nyan-Hwa Tai	Manager	2006-08 ~ 2007-07	National Science Council
2005	奈米碳管的合成與在場發射顯示器上之應用(2/2)	Nyan-Hwa Tai	Manager	2005-08 ~ 2006-07	National Science Council
2005	N 2奈米材料與科技	Nyan-Hwa Tai	Manager	2005-04 ~ 2006-03	Ministry of Education
2004	二次電子發射材料研究計畫	Nyan-Hwa Tai	Manager	2004-01 ~ 2005-12	Industrial Technology Research Institute
2004	N 2奈米材料與科技	Nyan-Hwa Tai	Manager	2004-08 ~ 2005-07	Ministry of Education
2004	奈米碳管的合成與場發射顯示器上之應用(1/2)	Nyan-Hwa Tai	Manager	2004-08 ~ 2005-07	National Science Council

Work Experience

Institution	Title	Department/Division	Job Position	Date
National Tsing Hua University	Director	Division of Intenational and Continuing Education		2007-08 ~ 2010
National Tsing Hua University	Chairman	Department of Materials Science and Engineering		2003-08 ~ 2006-07
National Tsing Hua University	Deputy Dean of Academic Affairs	Office of Academic Affairs		2002 ~ 2003
National Tsing Hua University	Vice Chairman	Department of Materials Science and Engineering		2000-08 ~ 2003-07

Education

University	Nation	Department	Diploma	Date
University of Delaware	U.S.A	Mechanical Engineering	Ph.D.	~

國立清華大學材料工程學系(c) All RIGHTS RESERVED, Please see Terms of use
National Tsing Hua University
Department of Materials Science and Engineering,
101, Sec. 2, Kuang-Fu Road, Hsinchu 30013,Taiwan, R. O. C.
TEL：886-3-5715131 ext 33830,33831  FAX：886-3-5722366
E-Mail：mse@my.nthu.edu.tw   Powered by RulingDigital