Materials Science and Engineering, NTHU

People

:::

Name	Arnold C.M.Yang
Current Phone No.	03-5715131 #33850(Lab:33819)
FAX No.
Current Address	Materials Science & Technology Building R402, National Tsing Hua University
E-mail
E-mail(2)
Personal Website	http://www.mse.nthu.edu.tw/~acyang/

Classification	Full-Time
Title	Professor
Discipline	- Physical Properties of High Polymers - Mechanical Properties and Failure of Polymers - Thermodynamics of Solid State - Polymers and Environmental Protection
Speciality	-Nano-scale -Polymer mechanical property and physical property -Physics and materials of laser printing -Photoluminescent polymer -AFM -MEMS -Inject technology -Plasma polymerize -Laser print technique - physics property and material application

Publication List

1. Journal Articles
   1. C. W. Lin, L. C. Huang, C. C. M. Ma, A. C. M. Yang*, C. J. Lin, and L. J. Lin, "Nanoplastic Flows of Glassy Polymer Chains Interacting with Multiwalled Carbon Nanotubes in Nanocomposites" , Macromolecules 41, 4978-4988 (2008) IF=4.411, 2008
   2. S. A. Akhrass, G. Reiter, S. Y. Hou, M. H. Yang, Y. L. Chang, F. C. Chang, C. F. Wang, A. C.-M. Yang*, "Viscoelastic Thin Polymer Films under Transient Residual Stresses: Two-Stage Dewetting on Soft Substrates" , Phys. Rev. Lett. 100, 178301 (2008) IF=6.944, 2008
   3. Y. H. Liu, C. W. Lin, M. C. Chang*, H. Shao, A. C.-M. Yang, "The hydrothermal analogy role of ionic liquid in transforming amorphous TiO2 to anatase TiO2: elucidating effects of ionic liquids and heating method" , J. Mater. Sci. 43, 5005-5013 (2008) IF=1.081, 2008
   4. M. H. Yang, S.Y. Hou, Y. L. Chang, and A. C.-M. Yang*, "Molecular Recoiling in Polymer Thin Film Dewetting" , Physical Review Letters (SCI) IF=7.072, 2006
   5. Chih-Chun Hsiao, T. S. Lin, L. Y. Cheng, C.-C. M. Mar, and A. C.-M. Yang*, "The Nanomechanical Properties of Polystyrene Thin Films Embedded with Surface-grafted Multiwalled Carbon Nanotubes, Macromolecules (SCI), 38, 4811. (93-2216-E-007-021- )" , 2005
   6. T. S. Lin, C.-C. Hsiao, L. Y. Cheng, and A. C.-M. Yang*, "Percolated Network of Entangled Multi-Walled Carbon Nanotibes Dispersed in Polystyrene Thin Films through Surface Grafting Polymerization, Materials Chemistry and Physics (SCI) 94, 438. (93-2216-E-007-021- )" , 2005
   7. C.-Y. Chou and A. C.-M. Yang*, "The Triboelectrical Behavior in Toner/Carrier Systems, Journal of Imaging Science and Technology (SCI), 46(3) 208. (91-2216-E-007-017- )" , 2002
   8. H.C.Lin, I.F.Tsai, A. C.-M. Yang*, M.S. Hsu, and Y.C. Ling, "Polymer Diffusion and Microstructure at a Glassy-Rubbery Polymer Interface by SIMS, Macromolecules (SCI), 36, 2464. (92-2216-E-007-033- )" , 2002
   9. C.H. Lin and A. C.-M. Yang*, "The Crazing Micromechanism in Glassy Polymers by AFM" , 2001
   10. C.H. Lin and A. C.-M. Yang*, "Stability of the Superplastic Behavior of Glassy Polystyrene Thin Films in Sandwiched Structures, Macromolecles (SCI) 2001, 34, 4865-4873. (90-2216-E-007-036- )" , 2001
   11. C.H. Lin and A. C.-M. Yang*, "Superplastic Behavior of the Brittle Polymer Film in Multlayer Systems, Journal of Materials Science (SCI) 35, 4231-4242. (90-2216-E-007-036- )" , 2000
   12. X.W. Liu, S.H. Tsai, L.H. Lee, M.X. Yang, A.C.-M. Yang, I.N. Lin, and H.C. Shih*, "Electron Field Emission from Amorphous Carbon Nitride Synthesized by Electron Cyclotron Resonance Plasma, Journal of Vacuum Science and Technology B (SCI) 18, 1840. (90-2216-E-007-036- )" , 2000
   13. A.C.-.M. Yang* and T.W. Wu, "Wear and Friction in Glassy Polymers: Microscratch on Blends of Polystyrene and Poly(2,6-dimethyl-1 ,4-phenylene oxide), Journal of Polymer Science: Polymer Physics (SCI) 35, p1295." , 1997
   14. A. C.-M. Yang*, R. C. Wang, and J. H. Lin, "The Ductile-Brittle Transition of Poly(Phenylene Oxide) Films by Physical Aging, Polymer (SCI) 37, p5751." , 1996
   15. J.H. Jou*, C.-L. Cheng, E. C.-Y. Jou, A. C.-M. Yang, "Characterization of Vapor Deposition Polymerized Polyimide Thin Films, Journal of Polymer Science: Polymer Physics (SCI) 34, p2239." , 1996
   16. A. C.-M. Yang*, R. C. Wang , M. S. Kunz, and I. C. Yang, "The Microdrawing Process of Local Deformation Zones in Poly (phenylene oxide) by AFM, Journal of Polymer Science: Polymer Physics (SCI) 34, p1141." , 1996
   17. A. C. –M Yang*, "The Young’s Modulus of Deformed Materials with in Polymer Micro-Deformation Zone by AFM, Materials Chemistry and Physics, (SCI) 41, p295." , 1995
   18. A. C. -M. Yang*, E. C. Y. Jou, Y. L. Chang, J. H. Jou, "The Solvent-Induced Cracking in Glassy Polymer Coatings by AFM, Materials Chemistry and Physics (SCI) 42, p220." , 1995
   19. A. C.-M. Yang*, C.-Y. Chou, M.-C. Wu, D.-R. Huang, and H.-C. Wang, "Tribo-Charging Between Toners and Carrier Bead surfaces, Recent Progress in Toner Technology, Chapter IV-Charge: Theory, Measurement and Characterization, 230." , 1995
   20. A. C.-M. Yang*, C. Y. Chou, M.-C. Wu, D.-R. Huang, and H.-C. Wang, " Modeling of the Tribo-Charging Between Toner and Carrier Beads, Recent Progress in Toner Technology, Chapter IV-Charge: Theory, Measurement and Characterization, 225." , 1995
   21. A. C. -M. Yang*, "Effects of Fillers on High Temperature Aging of Silicone Elastomers, Polymer (SCI) 35, p3206." , 1994
   22. A. C. -M. Yang*, "Spatially Resolved Measurements of the Equi-Biaxial Stress in Adhered Polyimide Films, Thin Solid Films (SCI) 41, p150." , 1994
   23. A. C. –M. Yang* and T. W. Wu, "Craze Breakdown and Wear Resistance in Polystyrenes,Journal of materials Science (SCI) 28, p955." , 1993
   24. A. C. –M Yang*, M. S. Kunz, and K. A. Logan, "Craze Topography by Scanning force Microscopy:Micro-Necking Operative during Crazing in Polymer Glasses, Polymer Materials: Science and Engineering 67, p387." , 1993
   25. J. L. Hedrick*, A. C.-M. Yang, J. Economy, J. C. Scott, and J. McGrath, "A Novel High Temperature Elastomer: Poly(Aryl Ether Ketones), Polymer Communications (SCI) 33, p5094." , 1993
   26. A. C.-M. Yang*, M. S. Kunz, and J. A. Logan, "Micronecking Operative during Crazing in Polymer Glasses, Macromolecules (SCI) 26, p1767." , 1993
   27. A. C.-M Yang*, M.S.Kunz and T.W. Wu, "Growth Mechanism, Local Stress, and Youn’s Moduli of Micro-deformation Zones in Glassy Polymer Films by AFM “,Materials Research Society Spring Meeting, San Francisco, CA, April 12-16, 1993; MRS Symposium Proceedings Vol.308, Thin Films: Stress and Mechanical Properties IV, p511." , 1993
   28. H. R. Brown* and A. C. -M. Yang, "The Use of Peel Tests to Examine the Self Adhesion of Polyimide Films, Journal of Adhesion Science and Technology (SCI) 6, p333." , 1992
   29. A. C.-M. Yang*, C. K. Lee, and S. Ferline, "Chain Scission in Polystyrenes by Impact Fracture, Journal of Polymer Science: Polymer Physics Edition (SCI) 30, p1123." , 1992
   30. A. C.-M. Yang*, R. D. Alien, and T. C. Reiley, "Evaluation of Particle Dispersion in Polymer Solids by Oxygen Plasma Etching, Journal of Applied Polymer Science (SCI) 46, p757." , 1992
   31. A. C.-M. Yang*, B. D. Terris, M. S. Kunz, J. A. Logan, and J. Vazquez, "Heterogeneous Behavior of the Elastically Deformed Polymer Glasses by Scanning Force Microscopy, Polymer Materials: Science and Engineering 67, p389." , 1992
   32. A. C.-M. Yang*, J.E. Ayala and J.C. Scott, "Abrasive Wear in Filled Elastomers, Journal of Materials Science (SCI) 26, p5823." , 1991
   33. A. C.-M. Yang*, J.E. Ayala, A. Bell and J.C. Scott, "Effects of Filler Particles on Abrasive Wear of Elastomer-Based Composites, Wear (SCI) 146, p349." , 1991
   34. A. C.-M. Yang*, B.D. Terris, and M. Kunz, "Force Microscopy of Stretched Polymer Glasses, Macromolecules (SCI) 24, p6800." , 1991
   35. J.L. Hedrick*, T.P. Russel, B. Haidar and A. C.-M. Yang, "Structural Modification in Hydroxy Ether-Dimethyidiphenylsiloxane Copolymers , Macromolecules (SCI) 22, p4470." , 1989
   36. H.R.Brown* and A. C.-M. Yang, "The Propagation of Cracks and Crack-like Defects in Thin Adhered Polymer Films, Journal of Materials Science (SCI) 25, p2866. " , 1989
   37. A. C.-M Yang and H. R. Brown*, "Solvent-Induced Local Deformation Zones in Polyimide Films Adhered to a rigid Substrate, Journal of Materials Science (SCI) 23, p65." , 1988
   38. H.R. Brown*, A. C.-M. Yang, T.P. Russel, W. Volksen and E.J. Kramer, "Chain Interdiffusion and Self-Adhesion of Polyimide Films, Polymer (SCI) 29, p1807." , 1988
   39. A. C.-M. Yang, E.J. Kramer*, C.C.Kuo, S.L. Phoenix,, "Craze Fibril Stability and Breakdown in Polystyrene, Macromolecules (SCI) 19, p2010." , 1986
   40. A. C.-M. Yang and E.J. Kramer,, ""Craze Microstructure Characterization by Low Angle Electron Diffraction and Fourier Transforms of Craze Images", Journal of Materials Science (SCI) 21, p3601." , 1986
   41. A. C.-M. Yang, E.J. Kramer*, C.C.Kuo, S.L. Phoenix,, "Craze in Diluted Entanglement Networks of Polystyrene, Macromolecules (SCI) 19, p2020." , 1986
   42. A. C.-M. Yang* and H.R. Brown, "Solvent Induced Crack-like Defects in Adhered Polyimide Films, Electronic Packaging Materials Science II 72, p217." , 1986
   43. A. C.-M. Yang and E.J. Kramer, ""Craze Fibril Structure and Coalescence by Low Angle Electron Diffraction", Journal of Polymer Science: Polymer Physics Edition (SCI) 23, p1353." , 1985
2. Patent
   1. 莫自治,周沁怡,鄭香京,楊長謀, "圖形加工對位法" ,
   2. 莫自治，周沁怡，張一熙，楊長謀，曾國佑，張英倫，鄭香京，蔡宏駿, "一種噴墨頭電阻層之製程" ,
   3. 莫自治,周沁怡,蔡宏駿,楊長謀,張一熙, "一種噴墨頭之製程與結構" ,
   4. 莫自治,莊元中,楊長謀,何進淵, "晶圓之固定裝置及方法" ,
   5. 莫自治,周沁怡,鄭香京,楊長謀, "具透明遮罩式晶片透孔加工法" ,
   6. 莫自治,周沁怡,鄭香京,楊長謀, "具保護層之晶片透孔加工法" ,
   7. 莫自治,周沁怡,楊長謀,莊元中, "印表機噴墨頭之製造方法" ,
   8. 莫自治,楊長謀,莊元中,何進淵, "快速黏合噴墨頭噴孔片之方法" ,
   9. 莫自治,楊長謀,劉心玉,張一熙, "矽晶圓之電鑄方法" ,
   10. 莫自治,周沁怡,鄭香京,楊長謀, "Method for Creating Via Hole In Chip" ,
   11. 莫自治,周沁怡,蔡宏駿,楊長謀,張一熙, "Manufactuing Process and structure of Ink Jet Printhead" ,
   12. 莫自治,周沁怡,楊長謀,莊元中, "Method and Device for Manufacturing Ink Jet Printhead" ,
   13. 莫自治,周沁怡,鄭香京,楊長謀, "具透明遮罩式晶片透孔加工法" ,
   14. 莫自治,周沁怡,鄭香京,楊長謀, "圖形加工對位法(Method for Creating Via Hole In Chip)" ,
   15. 莫自治,周沁怡,楊長謀,莊元中, "印表機噴墨頭之製造方法(Method and Device for Manufacturing Ink Jet Printhead)" ,
   16. 莫自治，呂宜境，楊長謀，薛達偉，彭力信，王雅慧, "墨水匣中泡棉之檢驗方法" ,
   17. 林振華，楊明勳，楊長謀，吳志成, "噴墨列印裝置之噴墨頭之製造方法及其裝置" ,
   18. 林振華，楊長謀, "噴墨頭之加熱元件形成方法及其結構" ,
   19. 林振華，江東山，楊長謀，吳志成, "辨識噴墨匣墨水之方法及其裝置" ,
   20. 林振華，楊明勳，周璟瑜，楊長謀, "具有壓電噴墨模組之墨水匣單元" ,
   21. 林振華，楊明勳，周璟瑜，楊長謀, "壓電噴墨頭之製程" ,
   22. 林振華，楊明勳，周璟瑜，楊長謀, "壓電式噴墨頭之測進口製程" ,
   23. 莫自治,鄭香京,周沁怡,楊長謀, "圖形加工對位法" ,
   24. 莫自治,鄭香京,周沁怡,楊長謀, "具透明遮罩式晶片透孔加工法" ,
   25. 莫自治,莊元中,楊長謀,何進淵, "晶圓之固定裝置及方法" ,
   26. 莫自治,鄭香京,周沁怡,楊長謀, "具保護層之晶片透孔加工法" ,
   27. 莫自治,周沁怡,蔡宏駿,楊長謀,張一熙, "一種噴墨頭之製程與結構" ,
   28. 莫自治,周沁怡,張一熙,楊長謀,曾國佑,張英倫,鄭香京,蔡宏駿, "一種噴墨頭電阻層之製程" ,
   29. 莫自治, 楊長謀, 張一熙, "噴墨印表機之墨水匣的噴墨頭結構(一)" ,
   30. 莫自治,楊長謀,莊元中,何進淵, "快速黏合噴墨頭噴孔片之方法" ,
   31. 林振華,周景瑜,楊明勳,楊長謀, "壓電噴墨模組" ,
   32. 楊長謀,林振華,李世光,張所鋐, "壓電式噴墨頭的噴墨裝置及其製造方法" ,
   33. 林振華,楊長謀,張所鋐,呂文崇,李世光, "壓電式噴墨列印頭及其製造方法" ,
   34. 楊明勳,楊長謀, "壓電噴墨列印頭的內連結結構及其工藝" ,
   35. 楊明勳,陳貴銓,楊長謀,徐智潔, "熱泡式噴墨列印頭及其噴嘴板的反向顯影法" ,
   36. 楊明勳,楊長謀, "壓電式噴墨晶片的成型方法" ,
   37. 林振華,周景瑜,楊明勳,楊長謀, "壓電式噴墨頭的側進口製造方法" ,
   38. 林振華,周景瑜,楊明勳,楊長謀, "壓電式噴墨頭的製造方法" ,
   39. 楊長謀,林振華,揚明勳,呂文崇, "噴墨列印頭晶片" ,
   40. 林劉恭,楊明勳,楊長謀,陳貴銓, "利用微影蝕刻製程製作噴墨式列印頭的噴孔片的方法" ,
   41. 楊長謀,張懿心,黃俊誠, "利用電漿聚合法製備聚乳酸及其共聚物" ,
   42. 楊長謀, 張一熙, 呂境, 薛達偉, "噴墨印表機用之芳香墨水" ,
   43. 莫自治,楊長謀, 呂宜境,胡紀如, "芳香墨水" ,
   44. 周璟瑜,楊長謀, "晶圓階段之噴孔片結構及其製作方法" ,
   45. 楊明勳, 楊長謀,陳貴銓,徐智潔, "熱泡式噴墨印頭及其噴孔片之反向顯影法" ,
   46. 楊長謀 呂境 薛達偉 薛潔筠 黃昶勝 饒麗雯, "噴墨印表機用之芳香醇墨水" ,
   47. 莫自治 楊長謀 莊元中 周沁怡, "印表機噴墨頭之製造方法" ,
   48. 周沁怡 張一熙 楊長謀, "噴孔片之製造方法" ,
   49. 吳志成 林振華 楊明勳 楊長謀, "噴墨匣" ,
   50. 江東山 吳志成 宋文港 楊長謀 蔡憲書, "噴墨匣" ,
   51. 楊長謀,張濬智,張懿心, "Method for Synthesizing Conjugated Polymer by Plasma Polymerization" ,
   52. 楊長謀,張豐志,王志逢,廖春雄,張懿心, "應用於水溶性液體噴射器口之超疏水性斥水層製備方法" ,
   53. 莫自治，周沁怡，張一熙，楊長謀，曾國佑，張英倫，鄭香京，蔡宏駿, "一種噴墨頭電阻層之製程" ,
   54. 莫自治，呂宜境，楊長謀，謝明發，胡紀如, "墨水組合物（二）" ,
   55. 周沁怡，楊長謀，張一熙, "噴孔片之製造方法" ,
   56. 楊長謀，林盈熙，謝明發，鄭泗東，周敏傑, "高分子材料構成技術媒體及其寫錄方法" ,
   57. 林振華，楊明勳，楊長謀，吳志成, "噴墨印表機之噴墨頭之製造方法及其裝置(Printhead of Ink Jet Printing Apparatus and Manufacturing Metho" ,
   58. Linliu; Kung,Yang; Arnold , Yang; Ming-H, "Method of using photolithography and etching for forming a nozzle plate of an inkjet print head" ,
   59. 楊長謀,張濬智,張懿心, "Method for Synthesizing Conjugated Polymer by Plasma Polymerization" ,
   60. 莫自治,周沁怡,鄭香京,楊長謀, "Method for Creating Via Hole In Chip" ,
   61. 莫自治,周沁怡,蔡宏駿,楊長謀,張一熙, "Manufactuing Process and structure of Ink Jet Printhead" ,
   62. 莫自治,莊元中,楊長謀,何進淵, "Wafer Securing Device and Method" ,
   63. 莫自治，楊長謀，呂宜境，薛達偉, "A Fragrant Ink for Ink-Jet Printers" ,
   64. J.Hedrick, A.C.M.Yang, W.Dickstein, J.Ayala, J.C.Scott, "Thermally stable,wear resistant fuser roll formulations" ,
   65. 莫自治,周沁怡,鄭香京,楊長謀, "Method for Creating Via Hole In Chip" ,
   66. 莫自治,周沁怡,蔡宏駿,楊長謀,張一熙, "Manufactuing Process and structure of Ink Jet Printhead" ,
   67. 莫自治,周沁怡,楊長謀,莊元中, "Method and Device for Manufacturing Ink Jet Printhead" ,
   68. J.Hedrick, A.C.M.Yang, W.Dickstein, J.Ayala, J.C.Scott, "A roll for fusing heat softenable toner material" ,
   69. 莫自治, 楊長謀, 張一熙, "噴墨印表機之墨水匣的噴墨頭結構(一)" ,
   70. 莫自治,楊長謀,薛達偉, "噴墨印表機之墨水匣的噴墨頭結構(二)" ,
   71. 莫自治, 楊長謀, 張一熙, "噴墨印表機之墨水匣的噴墨頭結構(一)(Inkjet Head for Ink Cartridge)" ,
   72. 莫自治,楊長謀,薛達偉, "噴墨印表機之墨水匣的噴墨頭結構(二)(Inkjet Head for Ink Cartridge)" ,
   73. 楊明勳，陳煥坤，楊長謀，宋文港, "噴墨匣機構" ,
   74. 楊明勳，吳志成，楊長謀，宋文港, "噴墨列印裝置之墨水匣構造" ,
   75. 蔡憲書，宋文港，吳志成，楊長謀, "可收縮墨水腔之墨水匣構造" ,
   76. 楊明勳，楊長謀，吳志成，林振華, "噴墨匣" ,
   77. 莫自治,楊長謀,薛達偉, "噴墨印表機之墨水匣的噴墨頭結構(二)" ,
   78. 楊明勳，蔡憲書，吳志成，楊長謀, "噴墨列印裝置之墨水匣構造(Ink-Jet Cartridge for an Ink Jet Printing Apparatus)" ,
   79. 蔡憲書，宋文港，吳志成，楊長謀, "可收縮墨水腔之墨水匣構造(Ink Cartridge Having a Collapsible Ink Reservoir)" ,

Research Project Overview

Year	Project Name	Participator	Job	Period	Cooperative Organization	Remarks
2008	光觸媒固定化於高分子材料之研究	Arnold C.M.Yang	主持人	2008-01 ~ 2008-12	工業技術研究院
2008	前瞻能源技術與優質環境研究─開發溫室氣體減量計數及建立低碳校園	Arnold C.M.Yang	共同主持人	2007-01 ~ 2010-12	National Tsing Hua University
2007	奈米高分子薄膜之界觀物理行為與前瞻應用-薄膜除潤、介面擴散、近場光學、分子機械行為以及光電與奈米微影特性	Arnold C.M.Yang	主持人	2007-08 ~ 2010-07	國科會
2006	使用離子液體固定化現生光觸媒粒於高分子材料上新穎技術	Amold C.M.Yang	Manager	2006-01 ~ 2006-11	Industrial Technology Research Institute
2006	高分子分子鏈之奈米行為與奈米光電生醫應用複材之基礎研究(重點研究計畫)	Amold C.M.Yang	Manager	2006-08 ~ 2007-07	National Science Council
2005	高分子奈米工程與其在光電及生醫領域之應用研究	Amold C.M.Yang	Manager	2005-08 ~ 2006-07	National Science Council
2004	奈米尺度高分子之物理行為與光電研究	Amold C.M.Yang	Manager	2004-08 ~ 2005-07	National Science Council

Work Experience

Institution	Title	Department/Division	Job Position	Date
台北醫學大學	兼任教授			2001 ~ 2008
國立清華大學	Professor	Materials Science and Engineering		1995-02 ~
國立清華大學	副教授	Materials Science and Engineering		1993 ~ 1995
Almaden Research Center IBM Inc. , USA			Research Scientist	1985 ~ 1993

Education

University	Nation	Department	Diploma	Date
Cornell University	USA	MSE	PH.D	1980-08 ~ 1985-03
National Taiwan University	R.O.C.	Physics	B.S.	1976-09 ~ 1980-06

Materials Science and Engineering, NTHU(c) All RIGHTS RESERVED, Please see Terms of use
National Tsing Hua University
Department of Materials Science and Engineering,
101, Sec. 2, Kuang-Fu Road, Hsinchu 30013,Taiwan, R. O. C.
TEL：886-3-5715131 ext 33831  FAX：886-3-5722366
E-Mail：mse@my.nthu.edu.tw   Powered by RulingDigital